Jasco RM94902 manual The AUX Button, Programming With Code Search, Retrieving Codes, Enter Off

The AUX Button

The AUX Button allows you to assign another TV, VCR or Cable Box to be controlled.

Programming With Code Search

If your TV, VCR, or Cable Box does not respond after you have tried all the codes for your brand, or if your brand is not listed, try searching for your code by following the steps below.

1.Manually turn on the the device you wish to assign to the AUX button (TV, VCR or Cable Box).

2.Press and hold the CODE SEARCH button until the INDICATOR LIGHT lights, then release the

CODE SEARCH button.

3.Press and release the AUX button. The INDICATOR LIGHT will blink.

4.Find the three digit code for the device you wish to program in the code list

Device	Page
TV	4
VCR	6
Cable Box	9

	INDICATOR
CODE SEARC	LIGHT

CH AUX BLINK

1.Turn on the device you wish to program.

2.Press and hold CODE SEARCH until the INDICATOR LIGHT lights, then release CODE

SEARCH.

3.Press and release the device button for the device you are pro- gramming (TV, VCR or CABLE). The INDICATOR LIGHT will blink once then remain lit.

4.Press and release POWER until your device turns off.

Important: You may have to press POWER up to 200 times.

5.When your device turns off, press the ENTER button, the

INDICATOR LIGHT will go off.

	INDICATOR
CODE SEARCH	LIGHT

TV VCR CABLE

BLINK

POWER

Enter the code using the

Number Buttons.

After your code is entered, the INDICATOR LIGHT will turn off.

5.Aim the remote at your device and press the POWER button. Your device should turn off.

ENTER OFF

Retrieving Codes

If you need to find the three-digit code for your TV, VCR or Cable Box after your device is set-up using Code Search, use this procedure.

Note: If your device does not respond, try all the codes for your brand. If the codes do not work, or your brand is not listed, try the Code Search method on page 11.

6.With your device on, press CHANNEL UP. If the device responds, no further programming is required.

8.Enter your code here for easy reference.

1 2 3 OFF

4 5 6

7 8 9

0

A¥BSLEEP

POWER

1.	Press and hold CODE SEARCH
	until the INDICATOR LIGHT
	lights, then release CODE
	SEARCH.
2.	Press and release the device
	button for the device’s code you
	are retrieving (TV, VCR or
	CABLE). The INDICATOR
	LIGHT will blink once then
	remain lit.
3.	Press and release CODE
	SEARCH. The INDICATOR
	LIGHT will turn off.
4.	Starting with 0 on the keypad,
	press the number buttons in
	order (0-9) until the INDICATOR
	LIGHT blinks.

CODE SEARCH INDICATOR LIGHT

TV VCR CABLE

BLINK

CODE SEARC OFF

R

CHAN

AUX CODE

5.	The number which causes the
	INDICATOR LIGHT to blink is
	the first digit of your code.
6.	Repeat step 4 until you have
	retrieved all three numbers in
	the code.

0 … 9

10 11