Operating A VCR (con’t)
4.Press STOP when you are finished.
5.Press REW to rewind the tape.
6.Press PAUSE to pause the tape.
7.Press RECORD twice to begin recording.
Programming Using Code Search
If your TV, VCR or Cable Box does not respond to your remote after you have tried all the codes for your brand, try searching for your code.
Program a device button using Code Search.
1. Manually turn on your TV, VCR or Cable Box.
2.Press the Device button (TV, VCR/DVD, or CBL/AUX) for five
(5) seconds. The Indicator Light will go on. Then release the device button.
3.Press and release POWER until the device turns off (you may have to repeat up to 200 times at a rate of
once per second).
4.Press the STOP button.
5.The Indicator Light will go off.
11
