To print and collate multiple copies

1Press + .

2Select the number of copies of the group of labels to

print and press .

3Select All to print all of labels in the group.

4Press .

5Select one of the following:

Yes to print collated.

No to print normally.

6Press to begin printing.

Printing Separator Lines between Cells

For multi-cell labels, such as breaker and module labels, you can choose whether or not to print a separator line between each of the cells. By default, separator lines are printed between cells.

To turn off printing of separator lines

1Press + .

2Select Print options and press .

3Select Separator lines and press .

4Select No and press .

Pausing Between Labels

When printing multiple copies, the printer pauses after printing each label so you can cut the label. You can turn this feature off to have the labels print continuously.

To print continuously

1Press + .

2Select Print options and press .

3Select Pause to cut and press .

4Select No and press .

Advancing the Label

To add additional blank space to the beginning or end of your label, you can advance the label in 1/4” increments.

To advance the label

1Press + .

2Press to advance the label.

Adjusting the Print Contrast

Depending on the label material you choose, you may need to lighten or darken the printed text on the label.

To adjust the print contrast

1Press + .

2Select Print options and press .

3Select Print contrast and press .

4Press or to increase or decrease the print contrast.

5Press .

6Repeat as necessary until you are satisfied with the print quality.

Cleaning Your Printer

Your printer is designed to give you long and trouble-free service, while requiring very little maintenance.

Clean your printer from time to time to keep it working properly.

To clean the cutter blade

1Remove the label cassette.

2Press and hold the cutter button to expose the cutter blade.

3Use a cotton ball and alcohol to clean both sides of the blade.

The cutter blade is extremely sharp.Use caution when cleaning.

To clean the print head

1Remove the label cartridge.

2Remove the cleaning tool from inside the label cartridge door.

Figure 7

3Gently wipe the padded side of the tool across the print head. See Figure 7.

16

Page 16
Image 16
Dymo 4200 manual Cleaning Your Printer, Printing Separator Lines between Cells, Pausing Between Labels, Advancing the Label