WALL SURFACE-MOUNTING

When deciding upon a location for the JBL Control NOW speaker, take care NOT to install the mounting bracket closer than 3" (horizontal) and 8-1/2" (vertical) to the ceiling. Any closer than the minimum measurements will not allow

the room needed to position and slide the JBL Control NOW speaker into the mounting bracket.

CAUTION

The customer is responsible for proper selection and use of mounting hardware (available through hardware stores), to properly and safely wall-mount the speakers. The JBL Control NOW speaker was designed to be easily installed. However, if you are unable to clearly and fully understand and follow the instructions in this manual, or if you are unsure of your ability to properly install these loudspeakers, please contact your dealer or a qualified installer. Please do not use any power tools during installation. Power tools can exert excessive and unnecessary torque which, in turn, can damage fasteners or other parts and accessories, reducing their strength and causing possible failure of the fastener or part. A failed or damaged fastener or part may not be able to perform as designed, and may lead to an unsafe installation.

1.Run the wiring to the location desired for mounting the JBL Control NOW speaker.

2.Using a level, secure the mounting bracket to the wall. Be sure to use an appropriate anchor.

Corner/Wall-Mount-

3" Minimum distance

 

Bracket Assembly

from ceiling

 

to top of bracket

8-1/2" Minimum distance

 

 

(horizontal mount)

from ceiling

 

 

to top of bracket

 

 

(vertical mount)

 

 

Appropriate

 

 

anchors

NOTE: There are two cable access holes provided in the Wall- Mount Assembly.

IMPORTANT: Make sure all equipment is turned off before making

any connections. For speaker connections, use a high-quality speaker wire with polarity coding. The side of the wire with a ridge or other coding is usually considered positive polarity (i.e., +).

NOTE: If desired, consult your local JBL dealer about speaker wire and connection options.

1. Strip 1/4" of wire

The speakers have coded terminals that

accept a variety of wire connectors. The most

2. Press and push connector

common connection is shown in the diagram

3. Insert bare end;

release push connector

to the left. To ensure proper polarity, connect

 

BLACK = —

each + terminal on the back of the amplifier

RED = +

or receiver to the respective + (red) terminal

 

 

on each speaker, as shown. Connect the

 

– (black) terminals in a similar way. See

 

the owner’s guides that were included with

 

your amplifier, receiver and television to

 

confirm connection procedures.

IMPORTANT: Do not reverse polarities (i.e., + to – or – to +) when making connections. Doing so will cause poor imaging and diminished bass response.

Standard

Connection

Wiring diagram shows polarity connections for one channel of a stereo or

RED = +

BLACK = —

home theater system.

 

 

3.Connect the wires to the JBL Control NOW speaker.

4

Page 3 Page 5
Page 4
Image 4
JBL CONTROL NOW AW manual Wall SURFACE-MOUNTING
Page 3 Page 5

CONTROL NOW, CONTROL NOW AW specifications

The JBL Control Now AW is a versatile outdoor speaker that blends advanced audio technology with a durable design, making it an ideal choice for various applications, including home patios, garden parties, or commercial spaces. Specifically engineered for outdoor use, the Control Now AW delivers high-quality sound and impressive durability that withstands the elements.

One of the main features of the JBL Control Now AW is its weather-resistant design. The speaker is crafted to resist moisture and UV rays, ensuring that it maintains its performance and appearance even in harsh environments. This means you can enjoy uninterrupted music during sunny days or occasional rain showers, significantly enhancing the outdoor experience.

The speaker employs JBL's proprietary technology to deliver clear sound and robust bass. With a wide frequency response, the Control Now AW provides a balanced audio profile, making it suitable for a variety of music genres. The speaker utilizes JBL's advanced driver technology, enabling it to reproduce sound with remarkable clarity and detail, even at higher volumes.

Another noteworthy characteristic of the Control Now AW is its multiple installation options. The speaker can be mounted on walls or ceilings, or even set on flat surfaces, allowing for flexibility in how and where it can be placed. This adaptability makes it easy to integrate into any outdoor setting while ensuring optimal sound coverage.

Additionally, the JBL Control Now AW features a sleek and modern design that complements contemporary outdoor aesthetics. Its elegant finish and streamlined shape allow it to blend seamlessly with various outdoor decors, making it not only functional but also visually appealing.

The speaker is also designed for straightforward setup and connectivity. It is equipped with standard connection options, ensuring compatibility with various audio systems. This makes it convenient for users to integrate the Control Now AW into their existing setups without hassle.

In summary, the JBL Control Now AW combines exceptional sound quality, weather-resistant durability, installation flexibility, and stylish design. Whether for entertaining guests at home or creating an inviting atmosphere in a commercial space, this speaker stands out as a top choice for anyone seeking premium outdoor audio solutions. With JBL's commitment to audio excellence, the Control Now AW is a robust solution that enhances any outdoor environment.
Top Page Image Contents