JBL ES25C specifications Specifications, JBL ES Series Speaker Systems, ES25c

JBL ES Series Speaker Systems

ES25c

Specifications

Frequency response (–3dB): 80Hz – 40kHz

Max. recommended amplifier power*: 150W

Power handling (continuous/peak): 75W/300W

Sensitivity (2.83V/1m): 90dB

Nominal impedance: 8 Ohms

Crossover frequencies: 3000Hz– 24dB/octave; 12000Hz– 18dB/octave

Low-frequency transducer: Dual 130mm (5") PolyPlas, shielded

Midrange transducer: NA

High-frequency transducer: 19mm (3/4") Titanium-laminate dome, shielded; EOS waveguide

Ultrahigh-frequency transducer: 19mm (3/4") Polyester-film, ring-radiator, shielded; EOS waveguide

Dimensions with grille (H x W x D): 178mm x 476mm x 254mm (7" x 18-3/4" x 10")

Weight per speaker: 7.6kg (16.7 lb)

*The maximum recommended amplifier power rating will ensure proper system headroom to allow for occasional peaks. We do not recommend sustained operation at these maximum power levels.

Harman Consumer Group, Inc.

2, route de Tours, 72500 Château du Loir, France • 250 Crossways Park Drive, Woodbury, NY 11797, USA • 8500 Balboa Boulevard, Northridge, CA 91329, USA www.jbl.com

©2007 Harman International Industries, Incorporated. All rights reserved. JBL is a trademark of Harman International Industries, Incorporated, registered in the United States and/or other countries. Elliptical Oblate Spheroidal (EOS), PolyPlas, Straight-Line Signal Path, FreeFlow and IsoPower are trademarks of Harman International Industries, Incorporated.

Features, specifications and appearance are subject to change without notice.