JBL ESC333 setup guide Remote and Front-PanelControls and Indicators, Remote Control, Front Panel

13

Surround

Mode

1. Power

This button, located only on the remote control, allows the user to manually turn on or off the ESC333. Please note that the ESC333 features Automatic Turn- On/Off, and the power switch is not normally used unless it is necessary to override this automatic feature, or in case the analog input to be used is not the last one that was used and so Automatic Turn-On is not available for that input. Please read the details regarding

Remote and Front-Panel Controls and Indicators

	23			20			24			25
				22									28		29		30
			19			21			26		17
18		5.1 Ch		Digital				ProLogic		PCM									31
		Surround		Phantom			3 - St		Late Night			LS LF		C RF RS		SUB		ON
16																LVL		STANDBY	32
15		DIG. OPT		DIG. COAX			TV		AUX							DLY			33
14
		Input			Surround Mode								Volume					Mute

4

Remote Control

Front Panel

5		2
	27
		6

1

2

Power		Volume
	Mute
Late Night	0 dB	Test

6

Automatic Turn-On/Off on page 3 of this manual, and keep in mind that if the ESC333 is shut down using this power button,

2. Mute

From either the front panel or the remote control, press (Mute) to lower the volume completely.

3

7

9

4

5

Delay	Level
Adjustment
Input
—	+

Bass

— +

Treble

— +

8its automatic turn on feature will remain disabled for five minutes

10after the source connecred to the ESC333 is shut down also.

11 This is to prevent the ESC333 from repeatedly turning itself

12back on despite the user’s

wishes. The ESC333 can also be powered on by using the Input button (4) on the front panel of the subwoofer or on the remote control. Please note that if input selection is done by pressing the Input button, the Automatic Digital Input Selection of the ESC333 will be disabled until the ESC333 shuts down.

When the ESC333 is plugged into a working electrical outlet and its master switch on the back panel is set to On/Standby, the Standby (32) indicator will illuminate. The ON (31) indicator will light as soon as the ESC333 is turned on either automatically or via the pressing of the Power or Input buttons.

The mute symbol indicator (33) will illuminate. When you press either of the mute buttons again, the volume will return to its previous setting.

Note: The mute function can also be turned off by pressing either of the volume buttons on the front panel or the remote control.

3. Late Night

This feature is available for Dolby Digital only. It compresses the inherently dynamic digital sound so that the quiet and loud passages are not quite as different in sound levels as they ordinarily are. This feature allows the user to watch movies and listen to dialogue at toned- down levels so as not to disturb others by the loud sound effects that may be present. The Late Night indicator (26) illuminates when this feature is active.

-9-