Rear Channel Volume
Surround
– +
Calibrate
Surround
– +
Calibrate
Surround
– +
Calibrate
Push “Calibrate” on the | Push “+” on the remote con- | Push |
remote control until “Rear” | trol to increase the volume | control to decrease the |
appears in the display and the | of the rear channels. | volume of the rear channels. |
corresponding LED on top of |
|
|
the display is lit. |
|
|
Delay Time
The delay control allows the user to set the surround delay between 15 and 30 milli- seconds in 1 millisecond incre- ments. The best setting will depend on the distance between the main listening
area and the front speakers as well as the distance between the main listening area and the rear speakers.
The chart at the bottom shows the recommended settings.
Surround
– +
Calibrate
Surround
– +
Calibrate
Surround
– +
Calibrate
40
Speakers | 35 |
| |
|
| ||
Rear | 30 |
| |
25 | 15ms | ||
From | |||
20 |
| ||
feet) |
| ||
15 | 30ms | ||
(in | |||
| |||
10 | 30ms | ||
Distance | |||
30ms | |||
5 | |||
| |||
|
| ||
| 0 |
|
05 10 15 20 25 30 35 40 Distance (in feet) From Front Speakers
Preferable Acceptable
Push “Calibrate” on the remote control until “Delay” appears in the display and the corresponding LED on top of the display is lit.
Push “+” on the remote control to increase the delay time.
Push
– 20 –