I N T R O D U C T I O N
JBL’s HT Series takes advantage of our latest technology to deliver incredibly clean, detailed sound. Incorporating JBL’s symmetrical array design and exclusive Bi- Radial® horn, these loudspeakers deliver sound that is distributed over a wide soundstage with pinpoint imaging, and the HT4V is THX® Ultra certified. The horn should be directed at ear level in
order to maximize the imaging characteristics. The
loudspeakers are perfect for today’s Dolby* Digital and DTS® recordings.
The HT4H
S P E A K E R P L A C E M E N T
Proper placement of the speakers is an important step in obtaining the most realistic soundstage possible. These recommendations
are for the optimum placement of the loudspeakers. Use these placement recommendations
as a guide. Slight variations
will not diminish your listening pleasure.
HT4V
As Front Speakers
As Surround Speakers
1' | 1' |
o | o |
5– 6 ft. |
HT4H Center-Channel Speaker
Alternative Surround-Speaker Placement
For optimum performance, use the HT4H with the grille attached.
The front speakers should be placed the same distance from each other as they are from the listening position. They should be placed at about the same height from the floor as the listeners’ ears will be, or they may be angled toward the listeners.
The HT4H
or below the tweeters of the left and right speakers. It is often convenient to set the center speaker on top of the television set, as shown in the drawing.
The two surround speakers should be placed slightly behind the listening position and, ideally, should face each other and be at
alevel higher than the listeners’ ears. If that is not possible, they may be placed in the corners of the room behind the listening position, angled in toward the
center of the listening area. The customer is responsible for proper selection and use of mounting hardware, available through hardware stores, to properly and safely