I S T I N G C O N S T R U C T I O N, Speaker location | JBL HTI6C

E X I S T I N G C O N S T R U C T I O N

HTI6, HTI8

Level

Template

Remove the grille			from the	Determine the correct
speaker frame.				speaker location.

	≥1/2"
≥1/2"	≥1/2"

Note: Always allow at least one-half inch between a wall stud and the speaker cutout or the locking tabs will not be able to swivel into place.

Cut the dry wall.		Connect the speaker wires	Place the frame assembly
		to the speaker.	in the wall.

Screw down each of the four	Replace the metal grille.
Phillips head screws. The
locking tabs will swivel into
place and secure the unit to
the rear surface of the drywall.

5

Image 5

JBL HTI6C, HTI8 manual I S T I N G C O N S T R U C T I O N, From Determine the correct, Speaker location

Contents

HTI6, HTI8 and HTI6C Home Theater In-Wall Series JBL Consumer Products One pair of speakers with grille Car or office Front Speakers E a K E R P L a C E M E N TModels HTI6, HTI8 as Rear Speakers Model HTI6C in Ceiling Wire Length InstallationE a K E R C O N N E C T I O N S Connection Tips I S T I N G C O N S T R U C T I O N Cut the dry wall Connect the speaker wiresFrom Determine the correct Speaker location Cut the drywall Speaker Wires Place the frame assemblyAble to swivel into place To the speaker Wall I N T I N G T H E S P E a K E R A M E a N D G R I L L E TroubleshootingW C O N S T R U C T I O N Specification S