JBL IBT owner manual Listening To Music From A Bluetooth-Enableddevice, Device

Models: IBT

1 13
Download 13 pages 22.78 Kb
Page 7
Image 7
LISTENING TO MUSIC

LISTENING TO MUSIC

There are three ways to listen to music on your JBL On Tour iBT:

Via Bluetooth technology from a Bluetooth-enabled device.

Using the supplied Apple cable to connect an iPad, iPhone or iPod device to the JBL On Tour iBT’s USB port.

Using a stereo 3.5mm audio cable (not supplied) to connect an audio device’s audio or headphone output to the JBL On Tour iBT’s auxiliary 3.5mm mini jack.

To cycle through the sources, make sure the JBL On Tour iBT is not in the Bluetooth call mode and momentarily press the Phone “LISTENING TO MUSIC FROM A BLUETOOTH-ENABLED DEVICE ” button. Each press of the button changes to the next source. The source LED will change color to indicate the active source:

White = Apple cable (USB port)

Blue = Bluetooth (wireless)

Green = Auxiliary 3.5mm mini jack

LISTENING TO MUSIC FROM A BLUETOOTH-ENABLED DEVICE

1.Make sure the JBL On Tour iBT system is paired with your Bluetooth-enabled device (see Bluetooth Pairing section, on page 5).

2.Press the JBL On Tour iBT’s Phone “DEVICE ” button until the Source LED lights blue constantly. This indicates that the Bluetooth input is selected.

3.Go to the Bluetooth-enabled device’s music player and play music. Refer to the Bluetooth-enabled device’s user’s guide for directions and details about using its music player and transmitting music via Bluetooth technology.

Manual backgroundEnglish

4.Use the Bluetooth-enabled device to control playback. Adjust the volume using the “+” and “–” buttons located on the front of the JBL On Tour iBT unit.

LISTENING TO MUSIC FROM A CONNECTED iPad, iPhone or iPod

DEVICE

1.Plug the supplied Apple cable into the JBL On Tour iBT’s USB port, and plug your iPad, iPhone or iPod device to the cable’s 30-pin connector.

2.Press the JBL On Tour iBT’s Phone “Manual background ” button until the Source LED lights white constantly. This indicates that the Apple cable (USB) input is selected.

3.Use the iPad, iPhone or iPod device to control playback. Adjust the volume using the “+” and “–” buttons located on the front of the JBL On Tour iBT unit.

NOTE: When the JBL On Tour iBT is running on AC power, it will recharge the iPad, iPhone or iPod device while it is connected.

www.jbl.com 7

Page 7
Image 7
JBL IBT owner manual Listening To Music From A Bluetooth-Enableddevice, Device