JBL manual Speaker Connections, Receiver Speaker Outputs, + - +, Center, MODELS P25, P35

SPEAKER CONNECTIONS

MODELS: P25, P35

CENTER

– +

– +

CENTER

Receiver

Speaker Outputs

Speakers and electronics ter- minals have corresponding (+) and (–) terminals. It is impor- tant to connect both speakers identically: (+) on the speaker to (+) on the amplifier and (–) on the speaker to (–) on the amplifier. Wiring “out of phase” results in thin sound, weak bass and poor imaging.

To use the binding-post speaker terminals, unscrew the colored collar until the pass-through hole in the cen- ter post is visible. Insert the bare end of the wire through this hole; then screw the collar down until the connection

is tight.

The hole in the center of each collar is intended for use with banana-type connectors. To comply with European CE certification, these holes are blocked with plastic inserts at the point of manufacture. To use banana-type connectors requires the removal of the inserts. Do not remove these inserts if you are using the product in an area covered by the European CE certification.

MODELS: P25, P35

The supplied self-adhesive rubber feet may be attached to the bottom corners of your speakers to protect your furniture.