JBL PSW-D110 setup guide Placement, Hookup, Receiver/Amplifier, Speaker Output Left Right, + -+

Placement

•As a general rule, bass response increases as a subwoofer is placed closer to a wall. Therefore, bass output is maximized when the subwoofer is placed in a corner.

•It is also recommended that the subwoofer be positioned along the same wall as the front loudspeakers.

Low-frequency sounds are normally omnidirectional, meaning the listener can’t tell where they are generated from. However, frequencies between 75Hz – 150Hz can be localized, especially at higher volume levels. Positioning your subwoofer as recommended will provide the most natural soundstage and imaging from your loud- speaker system.

Remember that these are just guidelines. Since every listen- ing room is different, JBL strongly recommends experi- menting with the positioning of your subwoofer to obtain the most pleasing results in your room. One technique that can help you find the ideal

subwoofer location is to tem- porarily place the subwoofer near the main listening loca- tion. Then move around the room and determine where you hear the most pleasing bass performance. This would then be the ideal location for the subwoofer.

		120
High	90	150

Pass

Hookup

When we designed the PSW-D110 powered subwoofer, our goal was to offer the user the best possible performance combined with the the

most flexible and complete installation options. Please look over the following three examples to determine which description best matches your

	60	180
Phase	0	180
		120
Low	90	150
Pass
	60	180
High-Pass
Output
Line	L	R

RECEIVER/AMPLIFIER Input

system and follow the corre- sponding hookup instructions.

1)If your receiver/amplifier has no subwoofer outputs or preamp outputs for the left

and right channels.

SPEAKER OUTPUT

LEFT RIGHT

+ – – +

+

L

–

–

R

+

SPKR In

+

L

–

–

R

+

SPKR

Out

–+

–+

LEFT SPEAKER

RIGHT SPEAKER

– 3 –