JBL PSW-D110 setup guide

3)If your receiver/ampli- fier has preamp output jacks and main input jacks for the left and right channels or you have a separate pre- amp/processor and power amplifier.

This method of hookup can offer the highest level of per- formance for your complete loudspeaker system. The PSW-D110 incorporates a variable high-pass crossover in addition to a variable low-pass crossover. When

hooked up as shown above, the subwoofer will limit the low-frequency information that is returned to your receiver/amplifier. Your receiver/amplifier does not need to waste valuable power reproducing the low frequencies. In addition, since no low-frequency information is being sent to your main loudspeakers, they are able to reproduce mid and high frequencies with greater clarity.

High

Pass

Phase

Low

Pass

High-Pass

Output

Line

Input

+

L

–

–

R

120

90150

60 180

RECEIVER/AMPLIFIER

0180

120	PRE	MAIN
	OUT	IN

90150

LEFT

60 180

RIGHT

L R

+	MAIN SPEAKER OUTPUT
	RIGHT +	–	–	+	LEFT
L
–
–
R

+	+
SPKR	SPKR
In	Out

+–

RIGHT

LOUDSPEAKER

–+

LEFT

LOUDSPEAKER

– 5 –