GENERAL

INSTRUCTIONS

USE THE CORRECT

AC VOLTAGE

Connecting the unit to an outlet supplying a higher voltage may create a fire hazard.

HANDLE THE POWER CORD Do not disconnect the plug from the AC outlet by pulling the cord; always pull the plug itself. Pulling the cord may damage it.

If you do not intend to use your unit for any considerable length of time, disconnect the plug from the AC outlet. Do not place furniture or other heavy objects on the cord, and try to avoid dropping heavy objects upon it. Also, do not make a knot in the power cord. Not only may the cord be damaged, it can also cause a short circuit with a consequent fire hazard.

PLACE OF INSTALLATION Place the unit on a firm and level surface. Avoid installing your unit under the following conditions:

•Moist or humid places.

•Places exposed to direct sunlight or close to heating equipment.

•Extremely cold locations.

•Places subject to excessive vibration or dust.

•Poorly ventilated places.

Do not obstruct the ventilation slots on the amplifier by placing objects over them, otherwise, the temperature inside the unit may rise, possibly affecting its long- term reliability.

MOVING THE UNIT

Before moving the unit, be sure to pull out the power cord from the AC outlet and disconnect the inter- connection cords with other units.

DO NOT OPEN THE CABINET To prevent shock hazard, do not tamper with internal components for inspection or maintenance.

JBL does not guarantee against performance degradation resulting from any modification. If water,

a hairpin, or wire, accidentally enters the unit, immediately extract the plug from the AC outlet to prevent shock and consult an authorized JBL service station. If you use the unit under this condition, it may cause a fire or shock hazard.

CLEANING

If the unit gets dirty, wipe it with a soft, dry cloth. If necessary, wipe it with a soft cloth dampened with mild soapy water and then with a dry cloth. Never use benzene, thinner, alcohol or other volatile agent, and avoid spraying an insecticide near the unit.

For Customers in the UK

Your unit is supplied with the flex which will have either two or three wires, so the following items should be observed to guarantee safety:

TWO CORE FLEX

IMPORTANT. The wires in this mains lead are colored in accordance with the following code:

Blue – Neutral

Brown – Live

As the colors of the wires in the mains lead of this apparatus may not correspond with the colored markings identifying the terminals in your plug, proceed as follows:

The wire which is colored blue must be connected to the terminal which is marked with the letter N or colored black.

The wire which is colored brown must be connected to the terminal which is marked with the letter L or colored red.

3

Page 2 Page 4
Page 3
Image 3
JBL PSW 1200 owner manual USE the Correct AC Voltage, Moving the Unit, Cleaning
Page 2 Page 4

PSW 1200 specifications

The JBL PSW 1200 is a powerful subwoofer that is specifically designed to enhance the overall audio experience in home theater systems and music playback. Known for its deep bass response and robust performance, the PSW 1200 is an excellent choice for audiophiles and casual listeners alike.

One of the standout features of the JBL PSW 1200 is its advanced driver technology. It comes equipped with a large 12-inch polycellulose cone woofer that is engineered to produce deep, accurate bass. This driver can handle high power levels, ensuring that it provides a clear and dynamic sound without distortion, even at high volumes. The frequency response of the PSW 1200 ranges from 28Hz to 150Hz, allowing it to reproduce low frequencies with precision and clarity, making it ideal for explosive movie soundtracks and intricate musical passages.

The subwoofer employs a built-in 300-watt RMS amplifier, which provides ample power to drive the large woofer effectively. This powerful amplification allows the PSW 1200 to maintain a high level of performance with low distortion, delivering a consistent and powerful bass experience regardless of the content being played.

Another key feature is its adjustable crossover frequency. This allows users to set the crossover point to blend seamlessly with their main speakers. By tuning this setting, listeners can achieve a balanced sound profile that integrates the subwoofer with the rest of their audio system. The rear panel of the PSW 1200 also includes line-level inputs, speaker-level inputs, and controls for phase adjustment, giving users the flexibility to customize their setup to suit their room acoustics and personal preferences.

The durable and sleek design of the JBL PSW 1200 means it can fit into various home environments without compromising aesthetic appeal. Its solid enclosure minimizes vibrations and resonance, ensuring that the listener receives only the intended sound.

In terms of build quality, the PSW 1200 is crafted from high-quality materials, contributing to its longevity and reliability. The finish is available in a stylish black, making it easy to integrate into any home decor.

Overall, the JBL PSW 1200 subwoofer combines advanced technology, powerful performance, and user-friendly features, making it an excellent choice for anyone looking to enhance their home audio system with rich, deep bass.
Top Page Image Contents