CONNECTIONS

CAUTION: Before making any connections to your subwoofer, make sure the power to your entire system is OFF.

AC POWER

First make sure the Volume Control on the rear panel of your PSW Subwoofer is in the minimum position. Make all connections, then plug the AC cord into a wall socket.

INPUTS

Your PSW subwoofer has both line-level and speaker-level input connections. Review your receiver/T.V./source amplifier instruction manual to see which outputs your equipment provides, then follow the appropriate instructions below.

"Line Input" - Use the RCA (phono) input jacks labeled "Line Input" when connecting from a line-level device, such as a pre- amp, crossover, signal processor, or when using any of the line-level outputs on the rear of your receiver/T.V./source amplifier.

If your receiver has a single RCA output for sending the signal to the subwoofer, connect it to both R & L input jacks by using a "y" adapter (not included).

Many stereo/ large screen T.V.s have stereo (R & L) RCA jacks for sending the signal to external audio equipment. Your subwoofer connects to these using both the R & L input jacks. (See Fig. 1)

"Speaker Level Input (from amplifier)" – Use these inputs when connecting to the speaker out (speaker mains) of your receiver/T.V./source amplifier. Run speaker wires from the speaker output terminals (usually coded red and black) on the rear of your receiver/T.V./source amplifier to the red and black input terminals labeled "Speaker Level Input (from amplifier)" on the PSW subwoofer. (See Fig. 2)

Preparing the speaker level hookup wire

Your JBL dealer can recommend suitable cables, or you can buy wire at most hardware stores. High quality connectors and cable offer consistent performance that does not deteriorate over time. We recommend #16 AWG two- conductor insulated wire as a minimum size. If your PSW subwoofer is more than 30 feet (10 m) from your receiver/T.V./ source amplifier, use larger diameter wire.

Making the speaker level hookup

1.First measure the distance from your receiver/T.V./source amplifier to your PSW subwoofer.

2.Next make two hookup wires this length.

3.Strip off 3/8" of insulation from both ends of each conductor wire.

4.Twist each set of thin wires into a tightly-bunched spiral.

5.Now find a visual difference between the two conductors of each molded pair of speaker wire.

5

Page 4 Page 6
Page 5
Image 5
JBL PSW 1200 owner manual Connections AC Power, Inputs
Page 4 Page 6

PSW 1200 specifications

The JBL PSW 1200 is a powerful subwoofer that is specifically designed to enhance the overall audio experience in home theater systems and music playback. Known for its deep bass response and robust performance, the PSW 1200 is an excellent choice for audiophiles and casual listeners alike.

One of the standout features of the JBL PSW 1200 is its advanced driver technology. It comes equipped with a large 12-inch polycellulose cone woofer that is engineered to produce deep, accurate bass. This driver can handle high power levels, ensuring that it provides a clear and dynamic sound without distortion, even at high volumes. The frequency response of the PSW 1200 ranges from 28Hz to 150Hz, allowing it to reproduce low frequencies with precision and clarity, making it ideal for explosive movie soundtracks and intricate musical passages.

The subwoofer employs a built-in 300-watt RMS amplifier, which provides ample power to drive the large woofer effectively. This powerful amplification allows the PSW 1200 to maintain a high level of performance with low distortion, delivering a consistent and powerful bass experience regardless of the content being played.

Another key feature is its adjustable crossover frequency. This allows users to set the crossover point to blend seamlessly with their main speakers. By tuning this setting, listeners can achieve a balanced sound profile that integrates the subwoofer with the rest of their audio system. The rear panel of the PSW 1200 also includes line-level inputs, speaker-level inputs, and controls for phase adjustment, giving users the flexibility to customize their setup to suit their room acoustics and personal preferences.

The durable and sleek design of the JBL PSW 1200 means it can fit into various home environments without compromising aesthetic appeal. Its solid enclosure minimizes vibrations and resonance, ensuring that the listener receives only the intended sound.

In terms of build quality, the PSW 1200 is crafted from high-quality materials, contributing to its longevity and reliability. The finish is available in a stylish black, making it easy to integrate into any home decor.

Overall, the JBL PSW 1200 subwoofer combines advanced technology, powerful performance, and user-friendly features, making it an excellent choice for anyone looking to enhance their home audio system with rich, deep bass.
Top Page Image Contents