JBL S412PII manual LINE-LEVEL Connections, Left S412P Right S412P

LINE-LEVEL CONNECTIONS

RECEIVER/AMPLIFIER

SUBWOOFER OUT

Y-Connector

(not included)

LEFTRIGHT

LFE IN LFE IN

LEFT S412PII			RIGHT S412PII
Each S412PII speaker is also	filmmakers intended.	extension RCA patch cords.
equipped with a line-level	You will need to use a	Then plug each patch cord
Low-Frequency Effects	Y-Connector (not included)	into the LFE/Subwoofer input
(LFE/Subwoofer) input for	with one male connector	of the left and right S412PII
superior performance with	and two female connectors	speakers. Note: If your
digital surround formats. The	to connect the line-level	receiver has separate
.1 LFE channel contains	subwoofer output on your	left and right line-level
additional low-frequency	receiver/amplifier to the	subwoofer (or LFE) output
information not found in the	LFE/Subwoofer inputs on the	jacks, you do not need to
left- and right-front	S412PII speakers. Plug the	use a Y-Connector.
channels. The LFE input	male connector into the
works with the full-range	subwoofer output on your
speaker-level input to	receiver or amplifier, and
provide the dynamics and	connect each of the two
effects that your favorite	female connectors to

5