JBL SB210, SB-2 manual System #5 in Stereo, System #5 on 70V/100V Distributed Line

System #5 in Stereo

SPL (at 20 Feet):

94 dB Continuous (peaks of 104 dB)

Control 25AV	Control 25AV	Left
(8 ohm setting)	(8 ohm setting)

Satellite

Outputs

Right	Control 25AV	Control 25AV
	(8 ohm setting)	(8 ohm setting)

	Left
From	Input	MODULE SETTINGS:
		Stereo / Mono Selector: Stereo
Power	Terminals
Amp		4-Ohm / 8-Ohm Selector: 4-Ohms
	Right
		Control SB-210 with
		MTC-210-SATCrossover Input Module

Stereo System Connection Note

Ensure that the polarity hookup of the left and right inputs is correct. If one of the inputs is connected backwards (out of polarity), the sub-

woofer will not produce much (if any) bass.

System #5 on 70V/100V Distributed Line

SPL (at 20 feet, by tap setting on SB210):

At 250W Tap: 94 dB Continuous (104 dB peak)

At 125W Tap: 91 dB Continuous (101 dB peak)

At 78W Tap: 88 dB Continuous (98 dB peak)

Control 25AV	Control 25AV	Left
(8 ohm setting)	(8 ohm setting)

Satellite

Outputs

Right	Control 25AV	Control 25AV
	(8 ohm setting)	(8 ohm setting)

From
70V or 100V	Left/Mono
Power
		MODULE SETTINGS:
Amp
	Input	Stereo / Mono Selector: Mono
	Terminals	4-Ohm / 8-Ohm Selector: 4-Ohms
		Control SB-210 with
		MTC-210T-SATCrossover Input Module

15