JBL SCS160 manual Dolby* Pro Logic* Non-Digital - Speaker Level

DOLBY* PRO LOGIC* (NON-DIGITAL) – SPEAKER LEVEL

Use this installation method for Dolby Pro Logic applica- tions (not Dolby Digital, DTS® or other digital processing), where the receiver/processor does not have a subwoofer output, or a volume-controlled preamp (line-) level output:

Connect your receiver or amplifier’s front left and right speaker terminals to the left and right terminals on the subwoofer that are marked “High Level In.” Connect the left and right terminals on the subwoofer that are marked “High Level Out” to the corresponding terminals on the back of your front left and right speakers.

Connect your receiver or amplifier’s center, surround and surround back speaker terminals to the correspon- ding terminals on the back of your center and surround speakers.

Left Front				Center			Right Front
+	–						+	–
				+	–
				Subwoofer
			L	HIGH LEVEL		R
		+		–	–		+
	OUT
	IN
				Receiver
	Left Front			Center			Right Front
	+	–		+	–		+	–
	Left Surround			Surround Back			Right Surround
	+	–		+	–		+	–

Left Surround			Surround Back			Right Surround
	+	–		+	–		+	–

7