JBL Professional DPC-2 manual VP Series Systems Specifications, VP7210/95DP

VP SERIES SYSTEMS SPECIFICATIONS

VP7210/95DP
Specifications:
Frequency Response (+/-3dB):	80 Hz - 20 kHz
Frequency Range (-10dB):	50 Hz - 20 kHz
Coverage Pattern:	90° x 50° rotatable waveguide
Directivity Factor (Q):	10
Directivity Index (DI):	10 dB
Max Peak Output:	132 dB SPL 1m
Transducer Section:
Low Frequency Section:	JBL 2261FF, 254 mm (10 in) dia., 76 mm (3 in) Dual Coil
	neodymium Differential Drive®, Direct Cooled
Bandpass Nominal Impedance:	2 x 2 ohms
High Frequency:	JBL2452H-SL, 100 mm (4 in) titanium damped dia-
	phragm, 1.5 in. exit
Bandpass Nominal Impedance:	8 ohms
System:
DPC-2 Internal Amplification Output	1750 Watts Peak (875 Watts Continuous)
(at nominal load):
DPC-2 Output (Continuous IEC shaped pink	750LF/125HF Watts
noise into rated load impedance):
DPC-2 Output Section:	LF: Dual Bridged Technology™, Class D
	HF: Bridged Class D
Audio Input Connector:	XLR with loop-through
User Controls:	80 Hz Subwoofer High Pass Filter, Enable/Disable
	0-16 dB input Attenuator with 32 precision 0.5 dB steps
Signal Processing:	DSP based, resident in Input Module.
System Management:	DSP based limiters for mechanical and thermal
	protection
AC Power Operating Range:	90-132VAC/216-264VAC, 50/60 Hz
AC Line Voltage:	50/60 Hz, User Select; 120V/240V (-15%, +10%)
AC Input Connector:	Neutrik PowerCon (NAC 3MPA)
AC Loop-Thru:	Neutrik PowerCon (NAC 3MPB)
AC Current Requirement:	6A per system at 120V, 3A per system at 240V
Enclosure:
Box Construction:	5/8 in. multi-ply exterior grade Baltic birch. Internally
	braced. Black DuraFlex™ finish
Suspension System:	10 M10 fittings, 2 x M6 pullback on rear
Grille:	14 Gauge Black, powder-coated perforated steel with
	foam backing
Dimensions (H x W x D):	521 x 293 x 303 mm
	20.5 x 11.5 x 11.9 in.
Net Weight:	18.4 kg (40.5 lbs)

VP7212MDP
Specifications:
Frequency Response (+/-3dB):	60 Hz - 18 kHz
Frequency Range (-10dB):	55 Hz - 20 kHz
Coverage Pattern:	50° x 90° rotatable waveguide
Directivity Factor (Q):	15.8
Directivity Index (DI):	12 dB
Max Peak Output:	137 dB SPL 1m
Transducer Section:
Low Frequency Section:	JBL 2265G, 381 mm (15 in) dia., 76 mm (3 in) Dual Coil
	neodymium Differential Drive®, Direct Cooled
Bandpass Nominal Impedance:	4 ohms
High Frequency:	JBL2452H-SL, 100 mm (4 in) titanium damped dia-
	phragm, 1.5 in. exit
Bandpass Nominal Impedance:	8 ohms
System:
DP2 Internal Amplification Output	1750 Watts Peak (875 Watts Continuous)
(at nominal load):
DPC-2 Output (Continuous IEC shaped pink	750LF/125HF Watts
noise into rated load impedance):
DPC-2 Output Section:	LF: Dual Bridged Technology™, Class D
	HF: Bridged Class D
Audio Input Connector:	XLR with loop-through
User Controls:	80 Hz Subwoofer High Pass Filter, Enable/Disable
	0-16 dB input Attenuator with 32 precision 0.5 dB steps
Signal Processing:	DSP based, resident in Input Module.
System Management:	DSP based limiters for mechanical and thermal
	protection
AC Power Operating Range:	90-132VAC/216-264VAC, 50/60 Hz
AC Line Voltage:	50/60 Hz, User Select; 120V/240V (-15%, +10%)
AC Input Connector:	Neutrik PowerCon (NAC 3MPA)
AC Loop-Thru:	Neutrik PowerCon (NAC 3MPB)
AC Current Requirement:	6A per system at 120V, 3A per system at 240V
Enclosure:
Box Construction:	5/8 in. multi-ply exterior grade Baltic birch.
	Internally braced. Black DuraFlex™ finish
Suspension System :	None
Grille:	14 Gauge Black, powder-coated perforated steel with
	foam backing
Dimensions (H x W x D):	346 x 565 x 413 mm
	13.6 x 22.3 x 16.2 in.
Net Weight:	20.7 kg (45.5 lbs)

JBL Professional 9