JBL Professional WEM-1 manual Thank You For Choosing A Jbl Product, Unpacking The System, Included

THANK YOU FOR CHOOSING A JBL® PRODUCT

For more than 60 years, JBL, Inc., has been involved in every aspect of music and film recording and reproduction, from live performances to the recordings you play in your home, car or office.

You can be confident that the JBL® system you have chosen will provide every note of enjoyment that you expected – and that when you think about purchasing additional audio equipment, you will once again choose a JBL product.

Please take a moment to register your product at www.jbl.com to stay posted on the latest JBL advancements. This also facilitates a better understanding of JBL customers, allowing JBL engineers to design products that meet their needs and expectations.

The JBL On Air WEM-1 is an advanced wireless system that allows you to enjoy your favorite music in remote locations around your home, using almost any loudspeaker. To ensure trouble-free performance, please carefully read these instructions completely before connecting or using the system.

UNPACKING THE SYSTEM

Carefully unpack the system. If you suspect damage from transit, report it imme- diately to your dealer and/or delivery service. Keep the shipping carton and pack- ing materials for future use. Open the package and verify the following contents:

Included:

1 x Owner’s manual

1 x USA warranty sheet

1 x Receiver-amplifier module

1 x Power supply for receiver-amplifier

1 x 120V AC power cord for receiver-amplifier power supply

1 x 230V AC power cord for receiver-amplifier power supply – Shuko plug

1 x 230V AC power cord for receiver-amplifier power supply – UK plug

1 x Handheld remote control

2 x Wall-mount brackets for receiver

1 x Pedestal – to be attached on receiver’s left side if receiver is to be used vertically

1 x Transmitter module

1 x Power supply for transmitter

1 x 120V AC power cord for transmitter power supply

1 x 230V AC power cord for transmitter power supply – Shuko plug

1 x 230V AC power cord for transmitter power supply – UK plug

1 x 6' (1.8m) Audio stereo cable, RCA-RCA

1 x Wall-mount bracket for transmitter

2 x Panhead M3 x 4 machine screws for attaching wall-mount bracket to transmitter

4 x Small, round, self-adhesive feet – to be attached on transmitter’s left-side panel if transmitter is to be used vertically

￿

MUTE INPUT

￿ VOL ￿

￿

Remote Control

Wireless Transmitter

Wireless Receiver

3