COMMUNICATIONS TEST & MEASUREMENT SOLUTIONS

All major operators view 10 Gigabit Ethernet (10GigE) as the key enabling technology in today’s market and are implementing it in their networks as LAN, WAN, or in combination with OTN.

The major challenge of manufacturers is to provide interface cards with capabilities for multiple technologies. They need to verify the ports against various standards, such as IEEE and ITU-T, to ensure that all of the network layers are interacting properly. As Eth- ernet behavior changes from “best effort” to “carrier grade”, comprehensive testing is required.

The Module-E 10G for JDSU’s ONT-503/506/512 addresses the needs of R&D and SVT labs by providing all of the necessary functionality for testing layers 1 up to 3 of 10GigE LAN andWAN networks optical at different wavelengths and with electrical interfaces.

For these applications Module-E provides all necessary technologies LAN, WAN, FC, SONET/SDH, OTN and has stressed eye and jitter on its roadmap.

Introducing

Module-E 10G

within

ONT-503/506/512

R&D and Compliance Testing

•Built-in switchable and XFP optics and high output electrical interface

•Unframed BERT at 9.95, 10.0, 10.3, 10.5, 10.66, 10.7, 11.05, 11.1, 11.27, 11.32 Gb/s

•SONET/SDH framed signals with HO mappings

•SONET/SDH MultiChannel (192xSTS-1, 64xAU-3/-4)

•OTN at 10.7, 11.05, 11.1, 11.27,

11.32Gb/s with FEC stress testing

•ONT Wrapper/de-wrapper testing

•10GigE LAN/WAN BERT and L2/ L3 traffic

•10G Fiber Channel BERT

•256 MAC/IP Flows with 256 independent filters

•10 mixed VLAN / MPLS tags

•Enhanced Ethernet frames VPLS, MAC-in-MAC

•QoS, service disruption, packet jitter, BERT per flow

•Stressed eye testing

•Jitter/wander testing

WEBSITE: www.jdsu.com