Jeff Rowland Design Group 312 P R O D U C T F E At U R E S, point self-levelingchassis support

P R O D U C T F E AT U R E S

OWNER’S MANUAL MODEL 312 STEREO AMPLIFIER

•XLR input connectors for balanced system configuration.

•RCA input connectors for unbalanced system configurations.

•Dual Speaker Output Terminals on each channel for bi-wiring applications.

•User selectable switching between balanced and unbalanced connections.

•Transformer coupled inputs provide universal compatibility with other components and eliminate ground loop noise and EMI.

•High efficiency ICEpower® power conversion technology generates high output power with very little heat.

•Fully-balanced topology implemented in both input and output circuitry.

•Power Factor Correction (PFC) in power supply reduces AC line har- monic noise pollution and increases AC line power utilization to 99%.

•Proprietary switch-mode power supply technology ensures consistent performance under all operating conditions.

•12V remote ON/OFF remote power switching via 1/8” jack on rear panel.

•Standby power mode reduces warm-up time.

•CE approved speaker output terminals require no tools for secure, low resis- tance connections.

•Fail-safe operation provided by user-resetable thermal circuit breaker located on rear panel.

•Quiet, transient-free operation during power ON/OFF and input configuration switching.

•Selectable overall gain of 26 or 32 dB.

•Ultra-low resonance, structurally rigid chassis, precision-machined from a solid block of aircraft grade 6061-T6 aluminum.

•3-point self-leveling chassis support.

© Jeff Rowland Design Group 2007. All Rights Reserved. 3