Front & Rear Panel Function Controls

Before attempting any system interconnection, please familiarize yourself with the front and rear panel controls of the Model 2 Amplifier. The descriptions below refer to the numbers associated with the features in the diagram above.

Front Panel

AFRONT PANEL STANDBY/POWER button: Press to operate Amplifier in standby mode. This button will illuminate when the Amplifier is operational. When the button is not illuminated, all Amplifier inputs are muted and internal circuitry is reverted to power-saving (standby) mode. Note: All ON/OFF power switching should be initiated ONLY with this button. Anomalous operating conditions will automatically switch the Amplifier off (no illumination) and will prevent the Amplifier from being switched back on again until such a condition is eliminated.

Rear Panel

(Note: The switches described below can be switched, if desired, while the Amplifier is operational and playing music.)

1INPUT IMPEDANCE switch: This switch selects between a high (36KΩ ) or low (600Ω ) input impedance.

2OVERALL GAIN switch: This switch selects between a high (32 dB) or normal (26 dB) overall gain structure of the Amplifier.

Jeff Rowland Design Group Model 2 manual Front & Rear Panel Function Controls, Front Panel

Models: Model 2

Front Panel

Rear Panel