How TO LEVEL YOUR
REFRIGERATOR
Ifyour refrigerator requiresan icemaker water supply connection, complete connection instructions on page8 before levelingyour refrigerator.
4.Turn stabilizing legs (C) clockwise until firmly againstfloor.
5.Turn front roller adjustment screws
(A) 2 to 3 times counterclockwise,so that full weight of unit rests on stabilizinglegs(C).
V!T4 _I d£.J
MATERIALS NEEDED
Ya"hex headdriver
:_ Level
I. Removetoe grille and bottombracket
covers.
2.Turn both front adjustment screws
(A)clockwise to raise and counter- clockwise to lower.
3.Turn both rear adjustmentscrews(B) clockwise to raise and counter-
clockwise to lower.
6, Using a level, make sure front of refrigerator is ¼" (6 ram) or V2bubble higher than back of refrigerator. See levelingstep 3 for assistance.
7, Replace toe grille and bracket cover(s). See markings on inside of toe grille to insure properplacement.
Snap bottom portion into place first. Pressdown on top part of grille
until top portionsnapsinto place.
