Surface Burner Bases
The surface burner bases are not removable. Clean with warm soapy water and a
sponge or dishcloth. Burnedon grease can be removed with a household cleaner, such as Fantastik or 409, and a sponge. To prevent scratching, do not use abrasive cleaners or scrubbing pads.
NOTE: Be careful not to spill liquids through the holes in the burner bases.
Porcelain Spillover Bowls
Neverwipe awarm or hot porcelain enamel surface with adamp cloth. For general daily cleaning and light soil, wash with warm soapy water, rinse, and dry. To remove grease spatters, spray with cleaners such as Fantastik or409. DO NOT use abrasive orcaustic cleaning agents which may permanently damage the finish.
Igniters
If the igniters get dirty or greasy, clean with a toothbrush and warm soapy water. Rinse and dry thoroughly. DO NOT STRIKE or PRY the ceramic igniter.
Glass Cooktop
The tempered glass cooktop will withstand temperature changes while cooking. Although impact resistant, treat this glass cooktop with the same care you would any glass material.
Clean glasscooktop after surface has cooled. Wipe with a clean, damp sponge or cloth. Rinse and dry thoroughly to prevent a filmy residue. A glass cleaner may be used to remove smudge marks and stains.
Control Knobs
The knobs on the control panel can be removed with the controls in the OFF position. Pull each knob straight from the shaft. Wash knobs inwarm soapy water or dishwasher; donot use abrasive cleansers or materials. To replace each knob, match flat partof knob opening with the flat on the shaft, returning in OFF position.
IMPORTANT: Never use a metal blade to pry knob off. If knob cannot be easily removed, tuck the foldsof a clothdishtowel underthe knob skirtand pullthe towel upward with steady, even pressure.
tMPORTANT" Becareful to replace the knobs with gentle pressure. Never hit the knob on the shaft with your hand or any other object.
NOTE: When knobs areremovedfor cleaning, becareful not to spill liquids through holes in the control area.
11
