INSTALLATION INSTRUCTIONS
Models JEC9530 & JEC9536
403 WEST FOURTH STREET, NORTH D NEWTON, IA 50208
IMPORTANT - SAVE FOR THE LOCAL ELECTRICAL INSPECTOR’S USE
IMPORTANT: Installation should be performed only by an authorized
(Dimensions shown in both inches and centimeters)
JEC9530DIMENSIONS
| inches | cm |
A | 74.0 + 0.2 | |
B | 51.9 + 0.2 | |
C | 5.4 | |
|
|
|
D | 10.8 | |
|
|
|
E | 76.0 | |
|
|
|
F | 54.6 | |
|
|
|
G | 7.6 |
NOTE: “D” is clearance needed for unit depth measure down from top of countertop. Typical for all units.
JEC9536DIMENSIONS
| inches | cm |
A | 87.9 + 0.2 | |
B | 51.9 + 0.2 | |
C | 5.4 | |
|
|
|
D | 10.8 | |
E | 89.7 | |
|
|
|
F | 54.6 | |
|
|
|
G | 7.6 |
IMPORTANT
CUTOUT
DIMENSIONS ARE
CRITICAL
UNITS PROVIDED WITH 1/2 (1.3 cm) I.D. FLEXIBLE CABLE 48 (121.9 cm) LONG WITH 6 (15.2 cm) WIRE LEADS AT END, FURNISHED AND INSTALLED BY MANUFACTURER (CONNECT TO 240/120 VOLT ELECTRICAL SERVICE).
INSTRUCTIONS TO INSTALLER:
SSide and Back Wall Clearance: Unit may be safely installed as near as 2 1/2 inches (6.35 centimeters) from side walls and 3/4 inch (1.91 centimeters) from back wall.
Notice To Installer: Leave these instructions with the appliance.
Notice To Consumer: Retain these instructions for future reference.