INSTALLATION INSTRUCTIONS

Unpack the Refrigerator

NOTE: It is recommended that you do not install the refrigerator near an oven, radiator, or other heat source. Do not install in a location where the temperature will fall below 55°F (13°C).

WARNING

Excessive Weight Hazard

Use two or more people to move and install refrigerator.

Failure to do so can result in back or other injury.

■If the ice storage bin is located on the door, remove the temporary shield from underneath the ice storage bin. See “Ice Maker and Storage Bin.”

■Remove packaging materials. Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or glue. These products can damage the surface of your refrigerator. For more information, see “Refrigerator Safety.”

When Moving Your Refrigerator:

Your refrigerator is heavy. When moving the refrigerator for cleaning or service, be sure to protect the floor. Always pull the refrigerator straight out when moving it.

Do not wiggle or “walk” the refrigerator when trying to move it, as floor damage could occur.

Important information to know about glass shelves and covers:

Do not clean glass shelves or covers with warm water when they are cold. Shelves and covers may break if exposed to sudden temperature changes or impact, such as bumping. For your protection, tempered glass is designed to shatter into many small, pebble-size pieces. This is normal. Glass shelves and covers are heavy. Use special care when removing them to avoid impact from dropping.

LocationRequirements

WARNING

Explosion Hazard

Keep flammable materials and vapors, such as gasoline, away from refrigerator.

Failure to do so can result in death, explosion, or fire.

To ensure proper ventilation for your refrigerator, allow for ¹⁄₂" (1.25 cm) space on each side and at the top. When installing your refrigerator next to a fixed wall, leave 2" (5.08 cm) minimum on each side (depending on your model) to allow for the door to swing open. If your refrigerator has an ice maker, allow extra space at the back for the water line connections.

1/2" (1.25 cm)

2" (5.08 cm)

Electrical Requirements

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

Before you move your refrigerator into its final location, it is important to make sure you have the proper electrical connection.

Recommended Grounding Method

A 115 Volt, 60 Hz., AC only, 15- or 20-amp fused, grounded electrical supply is required. It is recommended that a separate circuit serving only your refrigerator be provided. Use an outlet that cannot be turned off by a switch. Do not use an extension cord.

NOTE: Before performing any type of installation, cleaning, or removing a light bulb, turn the control (Thermostat, Refrigerator or Freezer Control depending on the model) to OFF and then disconnect the refrigerator from the electrical source. When you are finished, reconnect the refrigerator to the electrical source and reset the control (Thermostat, Refrigerator or Freezer Control depending on the model) to the desired setting.

Electrical Accessory Port

Use 14 Volt, DC only, Class 2, centralpark™ Series A accessories only, with a maximum weight of 10 lbs (4.5 kg).

3

Page 2 Page 4
Page 3
Image 3
Whirlpool W10134555A Installation Instructions, Unpack the Refrigerator, LocationRequirements, Electrical Requirements
Page 2 Page 4

W10134555A specifications

The Whirlpool W10134555A is a versatile and efficient appliance designed to enhance the laundry experience by providing advanced features that cater to consumer needs. This model stands out for its user-friendly design and innovative technologies that aim to make laundry tasks simpler and more effective.

One of the main features of the Whirlpool W10134555A is its smart control system, which allows users to operate and monitor the appliance remotely. This technology is particularly beneficial for busy households, as it gives users the ability to start, stop, or schedule wash cycles from their smartphones. This smart functionality is complemented by an intuitive control interface, providing easy access to various wash settings and options.

The washer is equipped with multiple wash cycles, ensuring that it can handle different types of garments and fabrics effectively. From delicates to heavily soiled loads, the W10134555A has a cycle for nearly every need. The machine also features a sanitize cycle that uses higher washing temperatures to kill bacteria and allergens, making it ideal for households with sensitive skin or health concerns.

Energy efficiency is a hallmark of this Whirlpool model, utilizing advanced technology to minimize water and energy consumption without sacrificing performance. The machine is designed to optimize washing times and cycles, ensuring that it operates within eco-friendly parameters while delivering clean and fresh laundry.

Another standout characteristic of the Whirlpool W10134555A is its capacity. With a spacious drum, it accommodates larger loads, allowing users to do fewer loads overall. This is not only convenient but also contributes to water and energy savings.

Additionally, the washer features a built-in noise-reduction system that minimizes operational noise, making it suitable for use in various living situations, including apartments or homes where noise levels must be kept to a minimum.

Overall, the Whirlpool W10134555A combines efficiency, convenience, and innovative technology, making it a valuable addition to any laundry room. Its blend of smart features and practical design ensure that it meets the diverse needs of modern households, simplifying the laundry process while delivering excellent cleanliness and care for garments.
Top Page Image Contents