Whirlpool W10134555A warranty Water Filter Certifications, ElectricalAccessories

Models: W10134555A

1 44
Download 44 pages 11.14 Kb
Page 11
Image 11
Water is leaking from the dispenser

Water is leaking from the dispenser

WATER FILTER CERTIFICATIONS

NOTE: One or two drops of water after dispensing is normal.

Glass not being held under the dispenser long enough?

Hold the glass under the dispenser 2 to 3 seconds after releasing the dispenser lever.

New installation? Flush the water system. See “Prepare the Water System” or “Water and Ice Dispensers.”

Recently changed water filter? Flush the water system. See “Prepare the Water System” or “Water and Ice Dispensers.”

The dispenser water is not cool enough

NOTE: Water from the dispenser is chilled to only 50°F (10°C).

New installation? Allow 24 hours after installation for the

water supply to cool completely.

Recently dispensed large amount of water? Allow 24 hours for water supply to cool completely.

Water not been recently dispensed? The first glass of water may not be cool. Discard the first glass of water.

Refrigerator connected to a cold water pipe? Make sure the refrigerator is connected to a cold water pipe. See “Water Supply Requirements.”

ElectricalAccessories

Freezer door accessory not working properly

WATER FILTER CERTIFICATIONSWARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

Is refrigerator plugged in, and is power on? See “The refrigerator will not operate.”

Is the accessory plugged in at the top of the door? Be sure that the accessory is properly connected to the freezer door.

Is the accessory turned on, but not functioning properly? Read and follow any instructions provided with the accessory.

11

Page 11
Image 11
Whirlpool W10134555A warranty Water Filter Certifications, ElectricalAccessories, Water is leaking from the dispenser