Jenn-Air JRTDE228 manual Tools Required, Changing Doors

Changing Reversible Doors (Non-Dispenser Models Only)

Your refrigeratormay havebeen builtwiththe doors hingedto the rightor hingedto the left. Refer to the following instructionsfor door reversal.

Tools Required

Phillips screwdriver

End wrench (5/16")

5/16" Socket and ratchet

Putty knife

T25-TORXdriver

Changing Doors

1. Turn the freshfood controlto OFFand removeall food fromthe interior.

2.Usinga 5/16" socketandratchet,removethe screwsfrom the upperhinge. Carefullylift the door (includingupperhinge)offof the centerhingeand place it ona paddedsurface to prevent scratching. Avoid losing the spacer that was between the hinge and the cabinet top.

3.Unscrewthe hingepinoutof the centerhingeonthe top of the lower door. Carefully lift the lower door off the

lower hinge and place it on a padded surface. If the metal hinge pin pulls out of the lower hingewhen the dooris removed,pull it outof the doorbottomandpress it back into the hinge.

4.Usinga phillipsscrewdriver, removethe handles from the door edges. Remove the handle end caps on ModelsJRTE198 and JRTE218. To attach the han-

dlesandendcapsto the rightside,first removethe plug buttons. Invertthe handles and end caps and attach _= with screws. Press the plug buttons into the opposite side of the door.

5. Usinga puttyknife,pry theplugbuttoncoverfromthe metalbushingatthe topof the door. Save the coverfor future use.

6. Lifttheupperhingeandthespacerwashersfromthedoorandinstallthemat the opposite

corner,

7.Positionthe plugbutton cover,saved from step 5, over the old hingebushing andpress it into place.

8.Pry out the 3 plastic plugbuttons fromthe cabinet top and pressthem intothe opposite corner.

9.Withthe T25 socket wrenchand5/16" socket andratchet, removethe screws fromthe

centerhinge and spacerfrom the cabinet. Transfer the (2) screws from the leftend of the divider barto the right end, Installthe centerhingeand spaceron the left endof the dividerbarthe sameway it wasinstalledonthe rightend. Tightenboth screwsuntilthey arejust snug,then turn themone-halfturn more.

10.Prythe plugcoverfromthe metalbushing at the top of the lower doorandpress intothe metalbushing on the opposite side of the door.