CONTROLS & FEATURES | 3 |
CONTROLS: FILTER CHANGE INDICATOR (CARBON FILTERS)
Filter Change Reminder (Carbon, if fitted):
When your hood is installed as a 'Purifying' (Ductless Recirculating) unit, it is fitted with a set of Carbon Filters to purify exhaust and fumes from cooking, then
controls when set, will elapse and count usage time and indicate by a flashing when carbon filter replacement is needed.
Setting the Filter Change Reminder:
When Off, hold for approx. 5 seconds. The display will change from
(exhaust mode) to , (purifying mode/ carbon filters used) this indicates that the elapse timer function is switched on and Carbon Filters are used.
Filter Replace Indicator:
When the display starts flashing, the Carbon Filters require replacement.
Re-setting Function:
Once filters are replaced, with hood off,
press and hold , the display will appear; hold for approximately 5 seconds until
on display disappears |
|
|
| . The Filter |
|
|
|
|
|
Change Reminder is now
Set Mode
hold 5 secs.
Change Filters
To Reset
hold 5 secs.
display from <--> to <C>
display <C> flashes
display from <C> to < >