CONTROLS & FEATURES | 4 |
CONTROLS: FILTER CLEAN INDICATOR (METAL FILTERS)
Filter Clean Reminder (Standard Metal Filters fitted)
Whether your hood is installed as an Exhaust or Purifying unit, a set of metal filters are fitted by the factory. These Metal Filters are intended to filter out residue from cooking.
They need not be replaced on a regular basis but are required to be kept clean. The Filter Change Reminder function in the microprocessor will automatically indicate by a flashing
when the metal filters need to be cleaned after every 30 hrs. of use.
Filters can be cleaned by hand with
filters should also be soaked in grease cutting detergent such as Formula '409' or its equivalent, prior to cleaning.
Filter Clean Reminder:
When flashes on display, the metal filters installed are required to be cleaned. This will occur after every 30 hours of use.
Reset the Filter Clean Reminder timer when filters are cleaned and
and hold for approx. 5 seconds, the display will appear; hold for approximately
5 seconds until on display disappears
. The Filter Clean Reminder function is now
Clean Filters
display <A> flashes
To Reset
hold 5 secs. | display from <C> to < > | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|