4
•To prevent injury, one person should not attempt to
tilt the refrigerator by himself. Have someone else
assist to prevent the refrigerator from falling during
leveling leg installation.
WARNING
Dimensions Leveling Legs
Install leveling legs (located in literature pack):
•At least 2 people are needed to tip the refrigerator
backwards until there is approximately 12" (30.5 cm)
of clearance between the floor and the refrigerator.
•Screw one front leveling leg into the screw
impression found in each corner. Leveling legs
should be screwed in until snug.
•Repeat the above procedures to install the rear
leveling legs.
•The refrigerator should remain upright at least
30 minutes prior to plugging it in.
CAUTION
Level the Refrigerator
Using a carpenter’s level, check to be sure the
refrigerator is level from side to side and from front to
back. Leveling adjustments can be made by turning
the leveling legs counter-clockwise to increase height
and clockwise to decrease height.
NOTE: The refrigerator should not wobble. Use shims
to add stability when needed.
min. 34"
(86.4 cm)
max. 35"
(88.9 cm)
with
leveling
legs fully
extended
471⁄4"
(120.0 cm)
Side
22"
(55.9 cm)
241⁄4"
(61.6 cm)
Bottom of
Refrigerator
Weldnut
(each bottom
corner of
refrigerator)
Leveling Leg
(4 per refrigerator)
237⁄8"
(60.6 cm)
305⁄16"
(77 cm)
Front
3"
(7.6 cm)
41007710 ENG 5/03 6/11/03 10:58 AM Page 5