Jenn-Air W10197056B manual Cooktop USE, Cooktop Controls, Dual/Triple-Circuit Element

COOKTOP USE

Cooktop Controls

WARNING

Fire Hazard

Turn off all controls when done cooking.

Failure to do so can result in death or fire.

The controls can be set to anywhere between HIGH and LOW.

To Use:

Push in and turn knob to desired heat setting.

Use the following chart as a guide when setting heat levels.

SETTING	RECOMMENDED USE
High	■	Bring liquid to a boil.
Med High	■	Hold a rapid boil.
Medium High	■	Quickly brown or sear food.
Med	■	Maintain a slow boil.
Medium	■	Fry or sauté foods.
	■ Cook soups, sauces and
		gravies.
Med Low	■	Stew or steam food.
Medium Low	■	Simmer.
Low	■	Keep cooked foods warm.
Dual/Triple Circuit	■	Home canning.
Elements	■	Large-diameter cookware.
	■ Large quantities of food.
Melt	■	Melt chocolate or butter.
Warm Zone	■	Keep cooked foods warm

REMEMBER: When cooktop is in use, the entire cooktop area may become hot.

Hot Surface Indicator Light

This unit features a Hot Surface Indicator Light. The Hot Surface Indicator Light will glow as long as any surface cooking area is too hot to touch, even after the surface cooking area(s) is turned off.

If the cooktop is on when a power failure occurs, the Hot Surface Indicator Light will remain on after the power is restored to the cooktop. It will remain on until the cooktop has cooled completely.

Cooktop On Indicator Light

Each cooktop has a Cooktop On Indicator light. When the control knob is on, the light will glow.

Dual/Triple-Circuit Element

The dual-size and triple-size elements offer flexibility depending on the size of the cookware. Single size can be used in the same way as a regular element. The dual and triple sizes combine single, dual and outer elements, and are recommended for larger cookware, large quantities of food, and home canning.

Triple Element (on some models)

A

B C

A. Single size

B. Dual size

C. Triple size

Dual Element

A

B

A. Single element

B. Dual element

To Use SINGLE:

1.Push in and turn knob from the OFF position to the SINGLE zone anywhere between MELT and HIGH.

2.Turn knob to OFF when finished.

To Use DUAL and TRIPLE:

1.Push in and turn knob from the OFF position to the DUAL or TRIPLE zone anywhere between MELT and HIGH.

2.Turn knob to OFF when finished.

5