Installation Instructions

Unpacking

1.Empty the microwave oven of any packing materials.

2.Clean the inside with a soft, damp cloth.

3.Check for damage, such as:

a door that is not lined up correctly

damage around the door, or

dents on the interior or exterior of the microwave oven.

If there is any damage, do not operate the microwave oven until a designated service technician has checked it and made any needed repairs.

Location Requirements

WARNING

Excessive Weight Hazard

Use two or more people to move and install microwave oven.

Failure to do so can result in back or other injury.

IMPORTANT: The control side of the microwave oven is the heavy side. Handle the microwave oven gently. The weight of the microwave oven is over 35 lbs (15.9 kg).

Place the microwave oven on a cart, counter, table or shelf that is strong enough to hold the microwave oven and the food and utensils you place inside it.

The microwave oven should be at a temperature above 50°F (10°C) for proper operation.

NOTE: Some models can be built into a wall or cabinet by using one of the trim kits listed in the “Assistance or Service” section.

Do not block the exhaust vents or air intake openings. Allow a few inches of space at the back and side of the microwave oven where the exhaust vents are located. Blocking the exhaust vents could cause damage to the microwave oven, as well as poor cooking results.

Make sure the microwave oven legs are in place to ensure proper airflow. If vents are blocked, a sensitive thermal device may automatically turn the microwave oven off. The microwave oven should work properly once it has cooled.

Electrical Requirements

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

Observe all governing codes and ordinances.

Required:

A 120 Volt, 60 Hz, AC only, 15- or 20-amp electrical supply with a fuse or circuit breaker.

Recommended:

A time-delay fuse or time-delay circuit breaker.

A separate circuit serving only this microwave oven.

GROUNDING INSTRUCTIONS

For all cord connected appliances:

The microwave oven must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current. The microwave oven is equipped with a cord having a grounding wire with a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded.

WARNING: Improper use of the grounding plug can result in a risk of electric shock. Consult a qualified electrician or serviceman if the grounding instructions are not completely understood, or if doubt exists as to whether the microwave oven is properly grounded.

Do not use an extension cord. If the power supply cord is too short, have a qualified electrician or serviceman install an outlet near the microwave oven.

SAVE THESE INSTRUCTIONS

3

Page 3
Image 3
Jenn-Air W10244851A Installation Instructions, Unpacking, Electrical Requirements, Required, Recommended

W10244851A specifications

The Jenn-Air W10244851A is a premium appliance that embodies cutting-edge technology and sophisticated design, catering to modern culinary enthusiasts. This model is widely recognized for its innovative features and high performance, making it an essential addition to any kitchen.

One of the standout characteristics of the Jenn-Air W10244851A is its powerful built-in convection cooking system. This technology allows for even heat distribution throughout the oven cavity, ensuring that food is cooked thoroughly and consistently. Additionally, the convection fan circulates hot air, which not only reduces cooking times but enhances the flavors and textures of dishes.

Another significant feature of this appliance is its intuitive control panel. Users can easily navigate through a variety of cooking options and settings. The touch control interface is user-friendly, allowing for seamless adjustments to temperature and cooking times. Furthermore, the model includes smart technology features that enable remote control via smartphone applications, providing convenience for busy home cooks.

The Jenn-Air W10244851A also boasts stylish and durable construction. The stainless steel finish not only adds an elegant touch to the kitchen but is also resistant to fingerprints and smudges, making it easy to maintain. The spacious interior is designed to accommodate multiple dishes simultaneously, making it perfect for entertaining or large family meals.

Safety features are also a priority in the Jenn-Air W10244851A. It includes an automatic shut-off mechanism that enhances user safety by turning off the appliance after a set period of inactivity. Additionally, the oven's cool-touch door minimizes the risk of burns, ensuring peace of mind for users.

The model is equipped with various cooking modes, including baking, broiling, and roasting, allowing users to explore a wide range of culinary techniques. The self-cleaning option is another convenient feature, simplifying the maintenance process and ensuring that the oven remains in pristine condition even after heavy use.

In summary, the Jenn-Air W10244851A represents the perfect fusion of style, technology, and functionality. With its advanced cooking features, user-friendly controls, and elegant design, it stands out as a versatile appliance for both novice cooks and seasoned chefs. It's an investment in quality that enhances any kitchen experience, enabling users to elevate their culinary creations effortlessly.