Jensen 1304, 840 Speaker Wiring, PowerPlus 900/1150, PowerPlus 420/1302, PowerPlus Amplifiers

Speaker Wiring

The Speaker Wiring diagrams illustrate options for connecting one or two speakers. Observe the proper speaker polarity.

NOTE: PowerPlus amplifiers can drive speakers with a nominal impedance range of 2~ 4-ohms. For maximum power, configure your speakers for a nominal 2-ohm load.

NOTE: Do not overlook the use of the proper gauge speaker wire. The PowerPlus series of amplifiers require a minimum of 12-gauge wire.

PowerPlus 900/1150

Two Subwoofers	One Subwoofer
– – + +	– – + +

SPEAKER OUTPUT SPEAKER OUTPUT

2 ohm nominal 4 ohm nominal

	PowerPlus Amplifiers
PowerPlus 420/1302
Two Speakers	One Subwoofer

2 ohm nominal 4 ohm nominal

Tri-Mode

L

Inductor

C

HPF LPF FULL

C L

Capacitor

4 ohm minimum

7