Jensen CD-545 instruction manual Cd Player Operation, Notes on CD-R/RWDiscs, Cd Programmed Play

CD PLAYER OPERATION

Note: This CD player will not only play commercial CDs, but also self-compiled CD-R/RW discs. Do not attempt to play CD-ROM, CDI, VCD, DVD or computer CDs.

Notes on CD-R/RW Discs

ξBecause of non-standardized format definition/production of CD-R/RW, playback quality & performance are not guaranteed.

ξManufacturer is not responsible for the playability of CD-R/RW due to recording conditions such as PC performance, writing software, media ability, etc.

ξDo not attach a label or seal to either side of the CD-R/RW disc. It may cause a malfunction.

1.Open the CD Door by pressing the CD Door (#4) where indicated PUSH OPEN/CLOSE.

2.Carefully place an audio CD with its label side upward in the CD compartment and close the CD Door by pressing on the CD Door (#4) where indicated PUSH OPEN/CLOSE.

3.Set the Function Selector (#1) to the "CD" position. The POWER Indicator (#16) will light. The LED Display (#13) will briefly display flashing “- -”and then the total number of tracks on the CD will appear in the LED Display (#13) after a few seconds.

4.Press the CD PLPA/PAUSE Button (#12). The CD Play/Pause Indicator (#15) will light and the CD will start playing from the first track.

5.Adjust the Volume Control (#5) to obtain the desired sound level from the Built-in Speakers.

6.To enhance the bass effect, depress and release the BASS Button (#26) when a “click” is heard.

7.To suspend playing, press the CD PLAY/PAUSE Button (#12) and the CD Play/Pause Indicator (#15) will flash.

To resume playing, press the CD PLAY/PAUSE Button again.

8.You can choose to play your favorite track directly by pressing either the Skip Forward

Button (#7) or Skip Backward Button (#8). The LED Display (#13) will indicate the correct track number selected.

9.To locate a particular passage within a track, keep the CD Search Forward Button (#7)

or CD Search Backward Button (#8) depressed until it is found.

10.To repeat a particular track, press the CD REPEAT Button (#10) until the CD

Repeat 1/All Indicator (#14) flashes.

11.To repeat the entire CD,, press the REPEAT Button (#10) until the CD Repeat 1/All Indicator (#14) lights steadily.

12.To stop playing, press the CD STOP Ŷ Button (#11).

13.When you wish to turn off the CD Player, set the Function Selector (#1) to the "TAPE" position. The POWER Indicator will go off.

CD PROGRAMMED PLAY

This function allows the tracks to be played in a programmed sequence.

NOTE: Program can only be set in STOP mode.

1.In CD stop mode, press the PROGRAM Button (#9) once. Program No. “01” will appear and blink in the LED Display (#13).

2.Press the CD Skip Forward Button (#7) or CD Skip Backward Button (#8) to select the song to be programmed. For example track 5 is selected.

8