Jensen CD6112 instruction manual CD Player Operation

CD6112

CD PLAYER OPERATION

Insert and Eject CD

Insert a CD, label side up. To stop CD play and eject the CD, press the eject button (1).

NOTE: The unit is designed for play of standard 5” (12 cm.) compact discs only. Do not attempt to use 3” (8 cm.) CD singles in this unit, either with or without an adaptor, as damage to the player and/or the disc may occur. Such damage will not be covered by the warranty on this product.

Pause

Press the pause >/ button (8) to suspend disc play. Press the pause button again to resume disc play.

Track Select

Press the UP TUNING >> or DOWN TUNING << buttons (17) for less than one second to advance to the next track on the CD. The selected track number will appear on the display. Press and hold the UP TUNING >> or DOWN TUNING << buttons (17) to fast forward or fast reverse through the disc. CD play starts when the button is released.

Intro Scan (INT)

During disc play, press INT (9) to play the first 10 seconds of each track on the disc. When the desired track is reached, press INT again to end the scan and play the selected track.

Repeat (RPT)

Press RPT (10) during disc play to continuously repeat the track. Press RPT again to stop repeating.

Random (RDM)

Press RDM (11) during disc play to play all tracks on a CD in random, shuffled order. Press RDM again to stop random play.

CD6112
160
Watts		DX/ST
/	LOUD	PS/AS

CD Player Error Codes

If a problem should develop while operating the CD player, an error code (ER-1, ER-2, etc.) may appear on the display panel. This can indicate a number of problems with the unit, including a mechanical error or an error in the microprocessor control of the player. If an error code should appear, try ejecting and reloading the disc into the player. While the disc is out of the unit, make sure it is clean and undamaged, and then load it correctly. If this does not solve the problem, pressing the RESET button may help, but will erase the time and preset memory. If the suggested measures do not solve the problem, contact an approved warranty station near you for further assistance.

NOTE: If an MP3 or other unsupported format disc is inserted in the unit, 'Disc Error' appears on the LCD. This unit only supports the CD- DA format.

9