Jensen JCR-275 Setting UP the Time Zone, DST Daylight Saving Time, Setting UP the Alarms

1.	Press and hold the TIME SET BUTTON (#9) for 2 seconds to enter calendar setting mode.
2.	Press the BUTTON (#2) or BUTTON (#6) to increase or decrease the Year (digits are
	flashing) setting.

3.Press the TIME SET BUTTON (#9) to confirm and cycle through other settings as follow. Normal Year Month Day 12/24H Hour Min Normal

SETTING UP THE TIME ZONE

There are 7 time zones programmed into your unit:

Zone 1 : Atlantic time

Zone 2 : Eastern time (factory preset)

Zone 3 : Central time

Zone 4 : Mountain time

Zone 5 : Pacific time

Zone 6 : Yukon time

Zone 7 : Hawaiian time

1. In standby mode, press and hold the TIME ZONE BUTTON (#3) until the current time zone number shows and is flashing.

2. Press the BUTTON (#2) or the BUTTON (#6) to change to the time zone number, 1-7 as shown above that corresponds to your area.

3. Press the TIME SET BUTTON (#9) to confirm.

DST - DAYLIGHT SAVING TIME

The DST function allows you to add one hour to the current time (in Spring) and subtract an hour from the current time (in Fall), if DST is observed in your area.

Press and hold DST BUTTON (#2) for 3 seconds to toggle the DST function on and off. A icon will appear in the top left corner of the display when adding an hour and the icon will go off when an hour is subtracted.

CALENDAR AND TEMPERATURE DISPLAY

Selecting Calendar and Temperature display in normal time or radio mode:

Press the TEMP BUTTON (#6) to display the ambient indoor temperature momentarily for 5 seconds.

Note: The temperature display is default to display Celsius readings. To display Fahrenheit readings,press and hold the C/F BUTTON (#6) to change Fahrenheit.

Press the Y-M-D BUTTON (#2) to display the current Year momentarily (5 seconds). While the Year is displayed, press the Y-M-D BUTTON (#2) again to change to show the current Month and Date momentarily (5 seconds).

			SETTING UP THE ALARMS
Setting up Alarm 1 and Alarm 2 in normal time or radio mode:
1.	Press and hold the ALARM SET BUTTON (4) for 2 seconds to enter the alarm set mode.
2.	Press the		BUTTON (#2) or the BUTTON (#6) to increase or decrease the Hour (digits are
	flashing) setting.
3.	Press the TIME SET BUTTON (#9) to confirm and cycle through other settings as follow.
	Normal		ALARM1 Hour ALARM1 Minute Alarm Weekdays ALARM 2 Hour
	ALARM 2 Minute Normal
	Note for Weekday Alarms:
	1	– 7 means alarm will sound from Monday to Sunday.
	1	– 6 means alarm will sound from Monday to Saturday only.
	1	– 5 means alarm will sound from Monday to Friday only.

Changing the alarm output source:

E-6