JDV8035

INSTALLATION INSTRUCTIONS

Before You Begin

1.Disconnect battery negative terminal.

2.Remove transport screws.

Important Notes

Before final installation, test the wiring connections to make sure the unit is connected properly and the system works.

Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions.

Consult with your nearest dealer if installation requires the drilling of holes or other modifications to your vehicle.

Install the unit where it does not interfere with driving and cannot injure passengers if there is a sudden or emergency stop.

If the installation angle exceeds 30º from horizontal, the unit might not give optimum performance.

Avoid installing the unit where it will be subject to high temperatures from direct sunlight, hot air, or from a heater, or where it would be subject to excessive dust, dirt or vibration.

DIN Front Mount (Method A)

1.Slide the mounting sleeve off of the chassis if it has not already been removed. If it is locked into position, use the removal keys (supplied) to disengage it. The removal keys are depicted in “Removing the Unit”.

2.Check the dashboard opening size by slid- ing the mounting sleeve into it. If the open- ing is not large enough, carefully cut or file as necessary until the sleeve easily slides into the opening. Do not force the sleeve into the opening or cause it to bend or bow. Check that there will be sufficient space behind the dashboard for the radio chassis.

Dashboard

Bend Tabs

182

53

Screw Stud

3.Locate the series of bend tabs along the top, bottom and sides of the mounting

sleeve. With the sleeve fully inserted into the dashboard opening, bend as many of the tabs outward as necessary to firmly secure the sleeve to the dashboard.

4.Place the radio in front of the dashboard opening so the wiring can be brought through the mounting sleeve.

5.Follow the wiring diagram carefully and make certain all connections are secure and insulated with crimp connectors or electrical tape to ensure proper operation.

6.After completing the wiring connections, turn the unit on to confirm operation (vessel accessory switch must be on). If the unit does not operate, recheck all wiring until the problem is corrected. Once proper operation is achieved, turn the accessory switch off and proceed with final mounting of the chassis.

7.Carefully slide the radio into the mounting sleeve making sure it is right-side-up until it is fully seated and the spring clips lock it into place.

8.Attach one end of the perforated support strap (supplied) to the screw stud on the rear of the chassis using the hex nut and spring washer provided. Fasten the other end of the perforated strap to a secure part of the dashboard either above or below the radio using the screw and plain washer pro-

4

Page 4
Image 4
Jensen JDV8035 operation manual Installation Instructions, Important Notes

JDV8035 specifications

The Jensen JDV8035 is a robust vehicle audio system that stands out due to its impressive features and innovative technologies. Designed to enhance the in-car entertainment experience, this model combines high-quality sound with user-friendly controls.

One of the main features of the JDV8035 is its powerful amplification. It typically delivers an output of up to 50 watts per channel, which ensures that even the most dynamic music tracks can be heard with clarity and depth. This feature is complemented by its compatibility with a variety of audio sources, including CD, radio, Bluetooth, and USB inputs. This versatility allows users to connect their devices seamlessly, whether it's streaming music from a smartphone or playing tracks from a flash drive.

The Jensen JDV8035 also incorporates advanced Bluetooth technology, providing hands-free calling and audio streaming capabilities. This allows drivers to make calls safely without needing to take their hands off the wheel, promoting both convenience and enhanced road safety. Additionally, Bluetooth connectivity enables easy pairing with multiple devices, accommodating the whole family or group of friends in the vehicle.

The visual display of the JDV8035 is another highlight. It features a vibrant, easy-to-read LCD screen that provides clear visibility of song information, settings, and more. The interface is intuitive, making navigation through menus and options straightforward, even while driving.

When it comes to audio enhancement technologies, the Jensen JDV8035 supports various audio formats and has built-in equalizers, allowing users to fine-tune their listening experience. It often includes preset sound modes tailored for different genres of music, ensuring that every song is delivered with the best possible quality.

Moreover, the JDV8035 may feature a rear-view camera input, enhancing vehicle safety by providing drivers with a clearer view of their surroundings while reversing. This integration of technology reflects Jensen's commitment to not only improving sound quality but also ensuring that the driving experience is as safe as it is enjoyable.

The overall design of the Jensen JDV8035 is sleek and modern, ensuring that it fits well into a variety of vehicle interiors. Its solid construction and user-friendly layout further enhance its appeal, making it a worthwhile audio investment for any car enthusiast or casual user alike.