AUXILIARY INPUT
This unit provides an auxiliary audio signal input for connecting external audio devices such as an MP3 player or TV. Use an audio cable with 3.5
mmstereo plug (not included) to connect the external device to the AUX IN Jack located on the back of the unit.
1.) Connect the 3.5mm AUX IN stereo plug to the line out jack or Headphone jack of your external audio device
2.) Press the ON/STANDBY button to turn on the unit.
3.) To select auxiliary audio input, set the FUNCTION selector to iPod / AUX position.
4.) Turn on the auxiliary device.
5.) The volume and equalizer can now be controlled through the main unit. Operate all other functions on the auxiliary device as usual.
NOTE:
If your connected to the Line Out Jack of your external device, then you only need to adjust the volume control of this unit. If you connected the Headphone Jack of your external device then you may need to adjust both the volume control of your external device and the volume control of this unit to find the most desirable volume setting.
Press the ON/STANDBY button turning off the unit when you finish listening. Don't forget to switch off the power of your external device as well.
RESETTING
If the unit does not respond or has erratic operation, you may have experienced a severe electric shock (ESD) or a power surge that triggered the internal computer to shut down automatically. If this occurs, follow below steps to reset:
1.) Disconnect the main power.
2.) Remove
3.) Reinstall the back up batteries and then connect the main power again.
NOTE: Although disconnect the power will unlock the internal computer after a power surge, it will also erase all of the settings. After turning “ON” the unit, you will need to reset the settings again.
CARE AND MAINTENANCE
11
