TROUBLESHOOTING GUIDE
SPECIFICATIONS |
Power Requirement |
Symptom | Possible Problem | |
| AC Adaptor is not plugged into a | |
| wall outlet or the output connector | |
The unit does | is not plugged into the Power in | |
not respond (no power) | jack on the back of the unit. | |
| Wall outlet is not functioning. | |
| Using no/wrong iPod Adaptor. | |
iPod does not | iPod does not install properly. | |
dock properly | ||
| ||
| iPod is not installed properly. |
Solution
Plug the AC adaptor into a wall outlet and plug the output connector into the Power in jack on the unit.
Plug another device into the same outlet to confirm the outlet is working.
Make sure the dock insert is the proper fit for your iPod.
Remove your iPod from the dock and check for obstruction on the connectors in the dock and on your iPod. Then reseat it in the dock.
Remove your iPod from the dock and check for obstruction on the connectors in the dock and on your
Main unit |
|
AC input : | AC 15V, 2400 mA |
Remote Control | 2 x DC1.5V "AAA" |
Frequency Response | 100 - 16000Hz |
Total Power Output | 25W rms |
SERVICE
iPod does not respond to the speaker system
iPod does not charge up
Sound is distorted
Unit gets warm after extended play at high volume
Your iPod is locked up.
iPod mode is not selected.
iPod is not installed properly.
iPod is locked up/ frozen. iPod battery has problem.
Volume level is set too high.
Sound source is distorted.
This is normal.
iPod. Then reseat it on the dock.
Please make sure that your iPod is working properly before docking into the unit. Please refer to your iPod manual for info on resetting the iPod.
Slide the Audio Input Selection
switch at the back of the docking station unit to iPod position.
Remove your iPod from the dock and check for obstruction on the connectors in the dock and on your iPod. Then reseat it in the dock.
Please make sure your iPod is working properly before docking into the unit. Please refer to your iPod manual for details on resetting.
Decrease the volume.
If the iPod original sound source is of poor quality, distortion and noise are easily noticed with
If you are using an external sound source like older generation of iPod, try reducing the output volume on the device itself. Also try turning bass boost OFF or change the EQ setting.
Turn the unit off for a period of time or lower volume.
Please refer to the instructions on the enclosed warranty card for returning your unit for service. When returning the unit, please remove batteries to prevent damage to the unit in transit and/or from possible leakage. We are not responsible for batteries returned with the product or for the cost of replacement.
Distributed by:
SPECTRA Merchandising International, Inc. Chicago Industry Tech Park
4230 North Normandy Avenue Chicago, IL 60634, U.S.A.
Please have model number ready, for Customer Service, call
*The specification and external appearance of the set are subject to change without prior notice.*
Printed in China
13
14
