B.On/Off Timer Setting By Remote Only, E. Mute Function

B.ON/OFF TIMER SETTING (BY REMOTE ONLY)

This function allows the system to turn on automatically and wake you up by soft CD music or radio and shut off itself into standby mode when time is up.

1. In unit standby mode, press the “ MODE ” button on remote once, the LCD display will show “ON” timer icon and flashing.

2.Press “ MEM/CLOCK-ADJ ” button and then “ SKIP UP/ DOWN ” to set the hour.

3.Press “ MEM/CLOCK-ADJ “ button to confirm. Minute digits are flashing and prompt for input.

4.Press the “SKIP UP/ DOWN “ button to set the minute.

5.Press “ MODE ” button to store the timer starting time. “ OFF” timer will appear and flashing.

6.Follow above step 2-4 to set OFF timer.

7.Press the “MODE” button to confirm, “ ” icon flash and timer source CD/PHONO/TUNER/TAPE appears on the display.

8.Press the “ MEM/CLOCK-ADJ ” button once, timer source flashing.

9.Press the “ SKIP UP/ DOWN ” to set source to be controlled by timer and then press the “MODE” button to finish.

10.You can press the “ MODE ” button repeatedly to review the presets time in order.

NOTE: 1. The timer setting will automatically cancel if no button is being pressed in a period of about 10 seconds.

2.If you set ON/OFF timer for PHONO or TAPE, please make sure record or pre-recorded tape is installed and tone arm or cassette PLAY key is set and ready to play.

ACTIVE/DE-ACTIVE TIMER FUNCTION

1.To active the ON/OFF timer, press the “ SLEEP/TIMER ” button on main unit or “TIMER” button on remote once, the timer indicator is shown on LCD

2.To cancel ON/OFF timer function, press again “SLEEP/TIMER” button until the timer indicator “ ” disappear

C. PRESETS EQ FUNCTION

This unit provides 5 differences sound mode to enhance your listening experience. You can select the desired effect by pressing the “EQ” button repeatedly at following sequence:-

FLAT JAZZ ROCK CLASSIC POP