Jensen JMV12 operation manual Using the Wireless Game Controller, Bottom Side of Game Console

USING THE WIRELESS GAME CONTROLLER

The Game Controller transmits to the JMV12 with two infrared transmitters located on the front of the Game Controller.

The Game Controller must be pointed toward the JMV12 for correct operation.

Press the source button on the remote control or the unit until

AUX/GAME* is displayed.

GAME CONTROLLER FUNCTIONAL DESCRIPTION

1.Install two AAA batteries in the Game Controller. Observe the correct polarity.

2.Use the ON/OFF selector switch to turn on the Game Controller. A list of ten games will be displayed.

3.Use the A button (page up) or B button (page down) to display the three pages of games (1-10, 10-20, 21-30). Then use the direction buttons to move the arrow to the desired game. Press Start to select the game.

4.Press Start to begin the game. Press Start again at any time to pause the game.

5.Press RESET to return to the game list.

6.Use the ON/OFF selector switch to turn off the Game Controller after use.

*Note: The AUX/GAME input is a shared input. For game operation remove all plugs from the AUX input.

Bottom Side of Game Console

Battery case

24