Installation

Before you begin the installation of your POWER series amp remember, there are two ways to do things – right and twice! Use the proper installation techniques, tools and accessories to insure that your Jensen POWER series amp will put out all the power it was designed to. If necessary, seek a professional installer to have the amplifier installed correctly. Most mobile amp installations do not have the proper gauge wire for power and ground – do not let your amp be a victim of this common installation oversight!

NOTE: This device is a high-power audio amplifier intended for installation in vehicles with a 12-Volt negative ground electrical system. Attempting to connect or operate the amplifier with another type of electrical system may cause damage to the amplifier or the electrical system.

Installation Assistance

For installation assistance, call 1-800-323-4815 during normal business hours, or visit www.jensen.com at any time.

Supplies and Tools Needed

To install the amplifier, you will need tools, supplies and adapters. It is best to make sure you have everything you need before you start.

Supplies

•Black electrical tape

•Amplifier Installation Kit

Tools

•Cordless drill with assortment of bits

•Flat-head and Philips screwdrivers

•Wire cutters/strippers

•Crimping tool

•12-volt test light or digital multimeter

•Wire brush, sandpaper or scraping tool (ground connection to vehicle should be a clean, unpainted metal surface)

Instalación

Antes de iniciar la instalación de la serie de amplificadores POWER recuerde, hay dos maneras de hacer las cosas ¡bien o dos veces! Utilice las técnicas de instalación, herramientas y accesorios adecuados para asegurar que su amplificador Jensen de serie POWER podrá ofrecerle toda la potencia para la que fue diseñado. Si es necesario, busque un instalador profesional para instalar el amplificador correctamente. La mayoría de las instalaciones de amplificadores móviles no tienen un cableado del calibre adecuado para la potencia y la toma a tierra. ¡No permita que su amplificador sea víctima de estos descuidos comunes en una instalación!

NOTA: Este dispositivo es un amplificador de audio de alta potencia diseñado para vehículos con sistema eléctrico con toma a tierra negativo de 12 Voltios. Intentar operar o conectar el amplificador a otro tipo de sistema eléctrico puede causar daños en el amplificador o en el sistema eléctrico.

Asistencia para la Instalación

Para solicitar asistencia para la instalación, llame al 1-800- 323-4815 durante horas laborales, o visite www.jensen.com en cualquier momento.

Herramientas y Materiales Necesarios

Para instalar los amplificadore usted necesitará herramientas, materiales y adaptadores. Es importante contar con todos los elementos necesarios antes de comenzar.

Materiales

•Cinta aislante negra

•Equipo de Instalación del Amplificador

Herramientas

•Taladro sin cable con variedad de puntas y mechas

•Destornilladores planos y destornilladores Philips

•Cortadores de cables y pelacables

•Herramienta para ajustar conectores a presión (crimpar)

•Luz de prueba de 12-volt o multímetro digital

•Cepillo de alambre, papel de lija o herramienta para raspar (la conexión a tierra al vehículo debe ser una superficie metálica sin pintar y limpia)

JPA1150M/JPA1300M

Installation

Avant que vous ne commenciez l'installation de votre amplificateur de série POWER rappelez-vous qu'il y a deux façons de faire les choses - la bonne façon et deux fois ! Utilisez les bonnes techniques d'installation, les bons outils et accessoires pour assurer que votre amplificateur série POWER Jensen produit toute la puissance qu'il est conçu pour produire. Si nécessaire, ayez recours à un installateur professionnel pour vous aider avec l'installation correcte de votre amplificateur. La plupart des installations d'amplificateurs mobiles n'ont pas le fil de calibre correct pour puissance et terre - ne laissez pas votre amplificateur devenir un victime de cette négligence commune.

A NOTER : Cet engin est un amplificateur audio de haute puissance conçu pour installation dans des véhicules avec un système électrique de 12V terre négative. Toute tentative de brancher ou d'opérer cet amplificateur dans un système électrique d'un autre type peut nuire à l'amplificateur et au système électrique.

Asistance par l'installation

Si vous devez demander assistance technique par l'installation du amplificateur vous devez téléphoner au numéro 1-800-323-4815 ou vous pouvez visiter le site www.jensen.com.

Materiaux et outillage necessaires

Par installer les amplificateur vous nécessiterez des outils; des matériaux et des adaptateurs. C'est important que vous avez tous les éléments nécessaires avant commencer.

Materiaux

•Ruban isolent noire

•Equipement d'installation du amplificateur

Outillage

•Chignole sans câble à diversité de pointes

•Tournevis plains et tournevis Philips

•Trancheuses de câbles

•Outil par ajuster les connecteurs à pression

•Lumière de preuve de 12 - Volt ou multimètre digital

•Brosse métallique ; papier de verre ou outil pour racler (La connexion à terre du véhicule doit être une surface métallique sans peindre et propre)

4

Page 3 Page 5
Page 4
Image 4
Jensen Instalación, JPA1150M/JPA1300M Installation, Installation Assistance Supplies and Tools Needed
Page 3 Page 5

JPA1300M, JPA1150M specifications

The Jensen JPA1150M and JPA1300M are powerful and reliable amplifiers designed for a variety of audio applications, ranging from home theater systems to professional sound reinforcement setups. Both models are known for their robust construction, advanced technology, and exceptional performance, making them a popular choice among audiophiles and professionals alike.

The Jensen JPA1150M is a compact yet powerful amplifier that delivers up to 150 watts of RMS power per channel at 8 ohms, with a peak output of up to 300 watts. This model is engineered with a high-efficiency Class D amplifier topology, which not only reduces power consumption but also minimizes heat generation. This feature is particularly beneficial in applications where space is limited, as it allows for a more compact design without sacrificing performance. The JPA1150M is equipped with advanced thermal protection circuitry, ensuring reliable operation even under demanding conditions.

On the other hand, the Jensen JPA1300M steps up the game with a robust output of 300 watts RMS per channel at 8 ohms, with a peak output of 600 watts. This amplifier is ideal for users who require a higher power output for larger venues or more demanding audio setups. Like its counterpart, the JPA1300M utilizes advanced Class D technology for superior sound quality and efficiency. This model also features dual-channel operation, allowing it to drive multiple speakers with ease.

One of the standout features of both amplifiers is their extensive connectivity options. They come equipped with XLR, 1/4-inch TRS, and RCA inputs, providing flexibility for various input sources. The output options include binding posts and speakon connectors, making it easy to connect to a wide range of speakers and PA systems.

In terms of sound quality, both amplifiers are designed to deliver transparent audio with low distortion and high dynamic range. They feature adjustable gain controls and a signal LED indicator, allowing users to easily monitor performance and make necessary adjustments on the fly.

Overall, the Jensen JPA1150M and JPA1300M stand out in the market for their power output, efficiency, and versatility. Whether you're a musician, sound engineer, or home audio enthusiast, these amplifiers offer an exceptional solution for all your audio amplification needs. With reliable performance and easy-to-use features, they are a worthy investment for anyone looking to enhance their sound experience.
Top Page Image Contents