BASIC OPERATIONS (CONTINUED)
BASIC OPERATIONS (CONTINUED)
VIEWING THE CALLER ID MEMORY
Verify that the number on the display is correct, then press the STORE button again. The Memory indicator (“MEM”) will appear in the display.
Press the number “1” button to store the displayed number in memory location 1. Repeat steps 1 through 4 to store up to nine additional numbers in memories “2” through “0”
To view the new calls (NEW CALL indicator will blink), press the [] or [] button. As they are checked, the CALL
# will decrease.
When all new calls have been checked, “END OF NEW CALL” will appear in the display. Press the [] to view the oldest calls or the [] button to view the most recent calls.
TO CHANGE A STORED NUMBER:
To change one of the stored numbers, simply follow the procedures in steps 1 through 5 and enter a new phone number in the desired memory. The new phone number will be memorized and the previous phone number will be erased from the memory.
NOTE:For your convenience, you may write the names of the people whose numbers you stored on the small index card in the center of the cradle.
MESSAGE WAITING FUNCTION
NOTES:
•After all calls are viewed, “END OF LIST” will appear in the display.
•The NEW CALL indicator will blink until all new caller ID information has been reviewed.
•The RPT icon will appear in the display if you have received multiple new calls from the same number.
•If you receive a call from a number previously viewed in the caller ID memory, the data in memory will be replaced with the new call’s time and date, and the NEW icon
TO REDIAL A STORED NUMBER
When a caller has recorded a message on a personal message service, “ 
” will appear in the display and will go out when you retrieve your message.
This feature is only for subscribers of a voice mail message waiting service through the local phone company.
will light in the display.
•If no key is pressed within 20 seconds, the display will revert to normal display and show the total call counter, new call counter, current time and date.
ERASING THE CALLER ID MEMORY
Lift the handset and listen for a dial tone.
Press the MEMO button and then press one of the number keys, “1” through “0”, corresponding to the memory location you want to dial. The stored number will be dialed automatically.
15
To erase a single call, press the [] or [] button to select the call to delete, then press the ERASE button twice quickly. The information for that call will be erased and the call # and caller ID data will be updated.
ALL NEW CALLS MUST BE REVIEWED BEFORE ERASING CALLER ID MEMORY. To erase all calls in caller ID memory, press and hold the ERASE button for three seconds. The message “ERASE ALL CALLS” will appear in the display. Press the ERASE button again to confirm. All caller ID information will be deleted and “NO CALLS” will appear in the display.
16
