Verona VEBIG24 warranty Ignition Of The Oven Burner, Oven Cooking

Models: VEBIG24

1 28
Download 28 pages 45.85 Kb
Page 9
Image 9
IGNITION OF THE OVEN BURNER

￿

IGNITION OF THE OVEN BURNER

The thermostat allows the automatic control of the temperature.

The gas delivery to the oven burner is controlled by a two way thermostatic tap (oven and broil burners) with flame-failure device.

To light the oven burner operate as follows:

1) Open the oven door to its full extent.

WARNING: Risk of explosion! The oven door must be open during this opera- tion.

2) Press the oven control knob right down and, keeping it pressed, turn counter-clock-

wise (fig. 3.2) to max position

.

3)Release the knob and check the oven burner has lit; if not, turn the knob clockwise back to OFF and repeat the procedure from step 2.

4)Once the oven burner has lit, close the oven door slowly and adjust the burner according to the power required.

If the flame extinguishes for any reason, the safety valve will automatically shut off the gas supply to the burner.

To re-light the burner, first turn the oven control knob to position OVEN COOKING, wait for at least

1 minute and then repeat the lighting procedure.

Attention: the oven door becomes very hot during operation. Keep children away.

Fig. 3.2

OVEN COOKING

Before introducing the food, preheat the oven to the desired temperature.

For a correct preheating operation, it is advisable to remove the tray from the oven and introduce it together with the food, when the oven has reached the desired tempera- ture.

Check the cooking time and turn off the oven 5 minutes before the theoretical time to recuperate the stored heat.

9

Page 9
Image 9
Verona VEBIG24 warranty Ignition Of The Oven Burner, Oven Cooking