BEFORE USE

Remove the battery insulator from the battery compartment at the bottom cabinet.

POWER SOURCE

The unit operates on 1 x DC1.5V G10 button cell battery.

CHANGING BATTERY

The battery has to be replaced when the unit’s display gets dim.

1.Unscrew and remove the Battery Door from the back of the unit.

2.Replace the exhausted battery with a new one with positive (+) terminal facing upwards.

Important

i.Be sure that the battery is installed correctly according to the polarity diagram on the rating label. Wrong polarity may damage the unit.

ii.For better performance and longer operating time, we recommend the use of good quality alkaline battery.

iii.To avoid damage caused by leakage of the battery fluid, replace battery once every 12 months. Old battery can cause damage to the unit and will void the warranty.

iv.Do not dispose of batteries in fire, batteries may explode or leak.

NOTE FOLLOWING FUNCTION KEYS

Press this key to obtain results and automatically add them to the memory contents.

Press this key to obtain results and automatically subtract them from the memory contents.

Press this key to recall memory contents

Press this key to clear memory contents

Press this key once to clear the number just entered.

Press this key once to change a number from positive to negative and vice versa.

SAMPLE CALCULATION

1.Addition and Subtraction 123 + 456 – 789 = -210 ON/C 123 + 456 - 789 =

2.Multiplication and Division 456 x 789 ÷ 123 = 2925.0731 ON/C 456 x 789 ÷ 123 =

3.Mixed Calculation

(5 x 6 – 34) ÷ 2 + 8.27 = 6.27

ON/C 5 x 6 - 34 ÷ 2 + 8.27

4.Percentage Calculation 5% of 246

ON/C 246 x 6 CE 5 %

5.Add on Calculation 246 plus 5%

ON/C 246 + 5 %

- 1 -

=

Display

210 -

2925.0731

6.27

12.3

258.3

Page 2
Image 2
Jensen KT2088 owner manual Before USE, Power Source, Changing Battery, Sample Calculation