Jensen MSR2010 operation manual Sirius Radio Operation

MSR2010

SIRIUS RADIO OPERATION

18 4 19 11 3 17

2a

13

2b

1 14 8 6 5 7 9 10 20 21

Switching to SIRIUS Mode

Press the MODE button (4) to change the mode to Sirius radio mode.

Storing Preset Channels

The preset buttons (5-10) can be used to store 6 channels, allowing convenient access to your favorite channels.

Programming Channels

1.Select the channel you want to store in memory.

2.Press and hold a preset button (5-10) until the corresponding preset button number

appears.

123. Repeat steps 1 and 2 to program additional channels.

16Quick Tuning

15Press one of the six preset buttons (5-10) to select a preset channel directly.

Channel Direct Access Searching

1.Press and hold the BAND/SEARCH button (16) to access Direct Tune mode. “DIRECT-T” appears on the display for a few seconds.

2.Press the MODE button (4) to confirm.

3.Press the TUNE/TRK << / >> buttons (20/21) to move between the three digits.

4.Use the VOLUME +/- buttons (2) to select a number for each position.

5.Press the MODE button to confirm each digit.

6.Press the MODE button again to tune to the selected file.

Accessing your SIRIUS ID

1.In Sirius mode, press and hold the BAND/SEARCH button (16) to select DIRECT mode.

2.Press the MODE button (4) to activate Direct mode.

3.Press the MODE button for each digit to enter “000”.

4.Press MODE again to confirm. This will display the Sirius ID number for your tuner.

5.The Sirius ID number will scroll twice and then freeze with the first 11 digits on the display. Press the INFO/SCROLL button (12) to display the remaining digit.

Selecting a Band

In Sirius mode, press the BAND button (16) to access the Sirius user-preset channel groups in the following order: S1, S2, S3.

Category Tuning

1.Press the CAT - /+buttons (13/14) to change the category. Each category title and song title will be displayed in increments.

2.While in the category mode, press the CAT - /+buttons again to view category names. (The lowest channel number within the chosen category will always be the default first channel tuned.)

3.Press the MODE button (4) or the TUNE/TRK << / >> buttons (20/21) to choose desired channels in that category.

4.Press the TUNE/TRK buttons to select a channel within the chosen category.

5.Press MODE to confirm channel selection.

Alternate Display Information

Press INFO/SCROLL button (12) to change the display information in the following order:

ARTIST NAME > SONG TITLE > CATEGORY > CHANNEL NAME.

Satellite Signal Strength

The display will indicate satellite reception strength as shown below.

Signal Strength Strength Display

No Signal

Weak

Good

Excellent

Channel Up/Down Tuning

Press the TUNE/TRK << / >> buttons (20/21) to search for a channel. Press and hold the TUNE/TRK buttons to fast search.

7