MSR7007

SAFETY INFORMATION

When Boating

Keep the volume level Iow enough to be aware of your surroundings.

Protect from Water

Do not submerge the product directly in water, as this can cause electrical shorts, fire or other damage.

Protect from High Temperatures

Exposure to direct sunlight for an extended period of time can produce very high temperatures inside your vessel. Give the unit time to cool down before starting playback.

Do not mount radio within close proximity of engine compartment.

Use the Proper Power Supply

This product is designed to operate with a 12 volt DC negative ground battery system.

Protect the Disc Mechanism

Avoid inserting any foreign objects into the disc slot. Misuse may cause malfunction or permanent damage due to the precise mechanism of this unit. Do not keep the CD door open for long periods of time. EXPOSING THE UNIT TO WATER WITH THE CD DOOR OPEN WILL CAUSE DAMAGE OR MALFUNCTION.

CAUTION:

THIS MOBILE CD PLAYER IS A CLASS I LASER PRODUCT. THIS UNIT USES A VISIBLE/ INVISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS RADIATION IF EXPOSED DIRECTLY. BE SURE TO OPERATE THE MOBILE CD PLAYER AS INSTRUCTED.

DISC NOTES

Depending on the recording status, conditions of the disc, and the equipment used for recording, some CD-Rs/CD-RWs may not play on this unit. For more reliable playback, please adhere to the following recommendations:

•Use CD-RWs with speed 1x to 4x and write with speed 1x to 2x.

•Use CD-Rs with speed 1x to 8x and write with speed 1x to 2x.

•Do not play a CD-RW which has been written more than 5 times.

Compatible Disc Types

Table 1: General Disc Information

Disc Type

 

Logo

 

Diameter/

Playback Time

 

 

Playable Sides

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Audio CD

 

 

 

 

12 cm single side

74 minutes

 

 

 

 

REWRITABLE

 

 

 

 

RECORDABLE

 

 

 

 

 

 

 

 

 

 

NOTE: CD-R and CD-RW discs will not play unless the recording session is closed and the CD is finalized.

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OR PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

DO NOT OPEN COVERS AND DO NOT REPAIR BY YOURSELF. PLEASE REFER SERVICING TO A QUALIFIED TECHNICIAN.

WARNING:

•DO NOT OPEN, DISASSEMBLE OR ALTER THE UNIT IN ANY WAY. Doing so may result in fire, electric shock or product damage.

•USE THE CORRECT AMPERE RATING WHEN REPLACING FUSE. Failure to do so may result in fire, electric shock or product damage.

•DO NOT INSTALL IN LOCATIONS THAT MIGHT HINDER VESSEL OPERATION. Doing so may obstruct vision or hamper movement which can result in a serious accident.

•INSTALL THE WIRING SO THAT IT IS NOT CRIMPED OR PINCHED BY SCREWS OR SHARP METAL EDGES. Route the cables away from moving parts or sharp pointed edges. This will prevent crimping and damage to the wiring. If the wiring must pass through a metal hole, be sure to use a rubber grommet to prevent the wire's insulation from being cut by the metal edge of the hole. It is also recommended to apply sealing caulk to any opening that may potentially allow water to enter.

•Be sure to choose a location that is flat and has clearance above the unit to prevent any damage, as well as allow for ventilation.

•Before drilling any holes, carefully inspect the area underneath and behind the mounting surface where the devices will be mounted to make sure it will not interfere with existing wires, fuel lines, the fuel tank or any other objects that could be damaged.

•Always disconnect the vessel negative battery terminal to prevent accidental shorting during installation.

Disc Maintenance

•A dirty or defective disc may cause sound dropouts while playing. Before playing, wipe the disc using a clean cloth, working from the center hole towards the outside edge. Never use benzene, thinners, cleaning fluids, anti-static liquids or any other solvent.

 

 

 

 

 

 

 

 

 

 

Insert label

Do not bend.

Never touch

Wipe clean from

side up.

 

 

the under side

the center to the

 

 

 

of the disc.

edge.

 

 

 

 

 

•Be sure to use only round CDs for this unit and do not use any special shape CDs. Use of special shape CDs may cause the unit to malfunction.

•Do not stick paper or tape on the disc. Do not use CDs with labels or stickers attached or that have sticky residue from removed stickers.

•Do not expose discs to direct sunlight or heat sources.

NOTE: A disc may become scratched (although not enough to make it unusable) depending on how you handle it and other conditions in the usage environment. These scratches are not an indication of a problem with the player.

2

Page 3 Page 5
Page 4
Image 4
Jensen MSR7007 operation manual Safety Information, Compatible Disc Types, Disc Maintenance
Page 3 Page 5

MSR7007 specifications

The Jensen MSR7007 is a sophisticated car media receiver that elevates your in-car audio experience through a blend of advanced technology and user-friendly features. Designed for music enthusiasts and casual listeners alike, this device integrates modern connectivity options and comprehensive audio functionalities to ensure a seamless listening experience.

At the core of the Jensen MSR7007 is its Bluetooth technology, which allows for wireless streaming of music from smartphones and other compatible devices. This feature not only enables hands-free calling but also simplifies the process of enjoying your favorite tracks without the need for cumbersome cables. The receiver supports multiple Bluetooth profiles, enhancing compatibility with a wide array of devices.

One of the standout features of the MSR7007 is its large, bright LCD display, which provides easy visibility of track information, settings, and other functionalities. This LED display is paired with intuitive controls, allowing users to navigate through playlists and settings effortlessly. The receiver is also equipped with USB and auxiliary inputs, enabling direct connections for playing music from external devices such as USB drives or MP3 players.

In terms of sound quality, the Jensen MSR7007 excels with its built-in amplifier and an equalizer, giving users the ability to tailor audio output to their preference. The receiver features multiple preset EQ settings that cater to various music genres, ensuring that every note and beat comes through with clarity. Additionally, the unit is compatible with AM/FM radio, allowing listeners to tune into their favorite radio stations.

The MSR7007 is designed with user safety in mind. A built-in microphone facilitates hands-free communication, making it safer to take calls while driving. Furthermore, the device supports steering wheel control compatibility, enabling users to manage music playback without taking their hands off the wheel.

Durability is another characteristic of the Jensen MSR7007. Built to withstand the rigors of everyday use and the varying conditions of car interiors, this receiver is a long-lasting addition to any vehicle. Its modern design and functionality make it a suitable choice for car audio enthusiasts seeking a reliable and feature-rich media receiver, perfectly combining technology, convenience, and sound quality.
Top Page Image Contents