SD1513
NOTE: Never remove a USB device during recording or music transfer. This may damage the device or cause the system to lock up. Do not switch modes or turn the radio power or ignition off while recording.
Erasing Copied Files
You can erase copied files from a USB device or SD/MMC card while the file is playing, or after selecting the file in Number Search or Navigation Search mode. To erase a file, perform the following steps:
1.Press and hold the BAND button (5) to activate the Erase function. The LCD will display “ERASE 010”.
2.Press the AUDIO CONTROL button (4) to select Erase mode.
3.Turn the AUDIO CONTROL (3) and select “Y” to erase (or select “N” to cancel the erase function).
4.Press the AUDIO CONTROL button to confirm. The file will stop playback (if playing) and will be erased. When finished, the system will display “ERASE OK”.
File Management
Music recorded or transferred using the SD1513 will be stored in the default folders listed below:
•MY_MP3: Transferred MP3 files.
•MY_WMA: Transferred WMA files.
Recorded/transferred music is stored in the corresponding folder and given the following naming convention: “XX0001.MP3”, where XX is the name of the source (i.e. SD0001.MP3).
15
